Multisim transistor models needed.

I just installed multisim 11 to simulate some amplifiers. But, its master database does not have spice models for power BJTs commonly used like 2sc5200, mjl3281, 2n3773, mje15032 etc.
Anyone could provide models for these commonly used transistors would be a great help, and please advice how to update or install these models in multisim.

Regards,
Aniket
 
I have Multisim, too.
These 2 models are From FairChild. I dont remember if I got them from FairChild website.
I got more models.

At ANDYs website you can get two good models for MJL3281A and MJL1302A
Background Information for SPICE Model Article
Those two models are better than other.

MJE15032 I think it is in Multisim. At least MJE15030/31
.MODEL 2sc5200fc NPN (
+ IS =4.3031E-12
+ BF =152.1
+ NF =1.0
+ BR =6.155
+ NR =1.028
+ ISE =1.3924E-11
+ NE =1.5
+ ISC =2.7542E-11
+ NC =1.95
+ VAF =60.0
+ VAR =6.51
+ IKF =10.8637
+ IKR =0.1585
+ RB =2.47
+ RBM =0.02
+ IRB =0.08
+ RE =0.04
+ RC =0.015
+ CJE =5.8111E-9
+ VJE =0.6506
+ MJE =0.3357
+ FC =0.5
+ CJC =6.4394E-10
+ VJC =0.5
+ MJC =0.3966
+ XCJC =0.7624
+ XTB =1.0445
+ EG =1.1663
+ XTI =3.0 )
.MODEL 2sa1943fc PNP (
+ IS =3.5476E-11
+ BF =159.9
+ NF =1.0
+ BR =25.75
+ NR =1.011
+ ISE =2.5119E-10
+ NE =2
+ ISC =7.9433E-11
+ NC =1.37
+ VAF =60.0
+ VAR =11.07
+ IKF =2.8370
+ IKR =0.3548
+ RB =2.74
+ RBM =0.0381
+ IRB =3.6308E-3
+ RE =0.06
+ RC =0.01
+ CJE =4.1783E-9
+ VJE =0.6354
+ MJE =0.3374
+ FC =0.5
+ CJC =1.1383E-9
+ VJC =0.5
+ MJC =0.3699
+ XCJC =0.7624
+ XTB =1.5306
+ EG =1.1751
+ XTI =3.0 )
 
Last edited:
Anyone uses orcad Pspice simulator

Thanks all.
Anybody has an experience with orcad pspice simulator as I am going to download it. This software has models for most semiconductor companies namely ST, Philips, ON, Texas, International rectifier etc.

I loaded the models of 2sc5200/1943 in multisim but its showing bad results for my amp circuit, which otherwise perform well in real world.

Regards,
Aniket