More plinths

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Here are some pictures of plinths I made for myself and a couple of friends. The first is my Garrard 301:
 

Attachments

  • my 301 plinth.jpg
    my 301 plinth.jpg
    49.3 KB · Views: 730
I love the 'vertical' use of plywood

That's really not plywood per se. It's a German engineered material that is made up of beech veneer laminated under pressure with waterproof glue into 6" x 8" x 20" blocks. They were left over from a recent Exxon LNG storage facility project off of Gibraltar and I resawed them to make the plinths. Thankfully the resin was not impregnated into the wood and was relatively soft so it didn't tear up the cutting edges on my equipment.

John
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.