I replaced the power supply in this amp.
New fets,and drivers. Gate resistors all checked good.
When i power it up it idles fine.
As soon as i try plugging the rca jacks into the amp it will draw excessive current.
Any ideas on what to check?
New fets,and drivers. Gate resistors all checked good.
When i power it up it idles fine.
As soon as i try plugging the rca jacks into the amp it will draw excessive current.
Any ideas on what to check?
How much DC is on the RCA shield?
Place the black meter probe on the amplifier's ground terminal.
Place the black meter probe on the amplifier's ground terminal.
It appears that the transformer is shorted. You'll need to use the current limiting resistor to find the short (like you did last time).
Thanks Perry,
Just before u posted thats what i checked and found the short in the transformer and fixed the problem .
Amp works great now.
Just before u posted thats what i checked and found the short in the transformer and fixed the problem .
Amp works great now.
- Status
- Not open for further replies.