Gentlemen,
is here anybody who can source or hint at repair parts for ML?
Current need is for an old model 23 power amp Sprague 150uF 150volts cap.
This one is free standing, 56mm long and 19mm slim, don't want to use another type.
4 of these are in use.
Manufacturer and distributor will not assist and yes, I used the search button etc.
BTW online diagrams of the amp are of poor quality, perhaps somebody wants to share a better scan.
Thank you.
is here anybody who can source or hint at repair parts for ML?
Current need is for an old model 23 power amp Sprague 150uF 150volts cap.
This one is free standing, 56mm long and 19mm slim, don't want to use another type.
4 of these are in use.
Manufacturer and distributor will not assist and yes, I used the search button etc.
BTW online diagrams of the amp are of poor quality, perhaps somebody wants to share a better scan.
Thank you.
I have some of the older Sprague electrolytics, but they are 560uF/75V; 673D series in clear jacket.
I have four of the 150uf/150v 673D capacitors from an old ML. Two have 8652 date code and two have 8834 date code. Capacitance and ESR measure good.
Craig
Craig
Thread closed. Apparently the OP resolved the problem but neglected to tell anyone here.- Status
- Not open for further replies.