location of the clock...DENON 2910

bearhughug said:
Thanks buddy,
is it hard to remove it? I mean the loader...
BTW, how fast is the 2910 running?
I've got some 27MHz TCXO on my hand....
is it work?


Not that difficult. Make sure all cabling is disconnected and ALWAYS touch cabinet or PCB ghround prior to touching cabling and componewnts (to avoid ESD through them).

The 2900 runs at 27.000 MHz, so likely the 2910 too.

The TCXO will work but obviously I do not know anything about the jitter.