Is there a source out there for high power load resistors, non-inductive for checking out power amps? (1000 Watts)+
You'll probably need to parallel some of the big Dale resistors or get creative and build your own out of light bulbs or dryer heater elements or...
Grey
Grey
Try Digi-Key
Digi-Key has Ohmite TAP600 and TAP1000 series resistors rated at 600 W and 1 KW respectively @ 70 degrees C heat sink temp.
They're not cheap, at $103 and $115 each (plus heat sink, of course!). But they are claimed to have low inductance and capacitance.
See www.digikey.com for specs and purchase info. See www.ohmite.com for detailed spec sheet.
Digi-Key has Ohmite TAP600 and TAP1000 series resistors rated at 600 W and 1 KW respectively @ 70 degrees C heat sink temp.
They're not cheap, at $103 and $115 each (plus heat sink, of course!). But they are claimed to have low inductance and capacitance.
See www.digikey.com for specs and purchase info. See www.ohmite.com for detailed spec sheet.
- Status
- Not open for further replies.