When i stripped my LCD the connections where at the top. I have since built a wooden box and would like to confirm that my image is going to appear correct on the wall before screwing the 900000 screws down. The connections are on the bottom of my box, and im shining light through the panel from the backlight side. Is this proper placement? Thanks.
It will appear right side up, but backwards, unless you have a mirror in the image path.
Also: always mock-up your system before actually putting it together. The more times you reassemble the LCD panel, the more changes you'll break it. They are very fragile.
Also: always mock-up your system before actually putting it together. The more times you reassemble the LCD panel, the more changes you'll break it. They are very fragile.
- Status
- Not open for further replies.