KOnzert K6

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
hi audiomachines;

do you have schemes for these amps?

konzert or maybe crell,

since these amps have been earning a lot for years now

and also they're commonly using the cheap TOSHIBAS

5200/1943.......yet could deliver some brutal chest

pounding energy.!

actually, just being curious......

thanks......

macweb
 
audiomachines;

such circuit from DIFF stage to VAS is very reliable !

yet if such stages are coupled with a DEEP DARLINGTON

topology output stage you'll find your self building a

nuclear bomb.......

let me guess, are 2n5551 and 2n5401 for sure are used

in the DIFF stage ?:scratch: :scratch:
 
yup,

in thier site I thought they were crown CE's......hehehehe

actually I have only touch Sventa's (only touched and looked inside)....
I could see the old CA3080 if I'm not wrong,a VCA that's
used as a limiter......incorporated with an NE5532 as the input.......

are these also present in CRELLS......?
 
all konzert k series amp has a built in limiter, IMHO nasty sounding limiters especially when hard driven into hard clipping, I use a separate outboard limiter. I could recommend a K10, but your system operator must be really careful not to push it to often to light up the clip LED, there is also something called under powering a sub which could also lead to woofer burnout. Hope this helps.

Best regards,
audiomachines
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.