Member
Joined 2002
WOOO whooo i got my boards today i cant wait till i start populating them and builing my chassis..
WOOOO HOHHO
Jason
WOOOO HOHHO
Jason
Member
Joined 2002
heheheh well i should say then I CANT WAIT TO FIRE THEM UP AND HEAR THEM ( well no fire please but sound would be great LOL : O ) )
Member
Joined 2002
Member
Joined 2002
im building the aleph 5 and i also bought the aleph p1.7 BUT i need heat sinks where did you buy yuors from and do you have a pic.. of your heat sinks..
and what is the info on them
email me
jleaman@citytel.net
and what is the info on them
email me
jleaman@citytel.net
The pic would be here: http://www.passdiy.com/gallery/a75-p7.htm. Those are the best sinks for a job. Still available after 10 years.😉
Member
Joined 2002
I am not sure if this is the proper place for the topic (it would be under parts etc...) that we are disscusing here, but here we go one more time.
web site is http://www.r-theta.com
and model used #65340; 11" long each
For 4 of these 350 CAN$
hope this help.
Trigon. 😉
web site is http://www.r-theta.com
and model used #65340; 11" long each
For 4 of these 350 CAN$
hope this help.
Trigon. 😉
I have a PDF available for some Aavid Thermalloy Flat Back Heat Sinks, all perfect for DIY Chassis's as they can be ordered cut to length. I am waiting for a quote on 6 models from Future-Active. I will post to my website and provide link when finished.
Anthony
Anthony
Member
Joined 2002
Re: Aavid Thermalloy
I found out a little more information, the extrusions are sold as a half or full bar. This means basically, 3, 4, 6 and 8 foot lengths, if the your Distributor does not have stock to cut to length. There are some minimum orders in place for the extrusions if the Distributor does not stock it. There are Approx 30 Distributors across Canada, I have sent an RFQ to several of them and I am awaiting responces.
Anthony
I found out a little more information, the extrusions are sold as a half or full bar. This means basically, 3, 4, 6 and 8 foot lengths, if the your Distributor does not have stock to cut to length. There are some minimum orders in place for the extrusions if the Distributor does not stock it. There are Approx 30 Distributors across Canada, I have sent an RFQ to several of them and I am awaiting responces.
Anthony
JasonL or trigon,
You get the PCBs from http://web.vip.hr/pcb-design.vip , what are the objective quallity of the boards ?
Are they really look that good in live , like on the pictures ?
I did not saw any pictures of the Aleph P 1.7 PCB, is there silkscreen ?
You get the PCBs from http://web.vip.hr/pcb-design.vip , what are the objective quallity of the boards ?
Are they really look that good in live , like on the pictures ?
I did not saw any pictures of the Aleph P 1.7 PCB, is there silkscreen ?
Member
Joined 2002
http://web.vip.hr/pcb-design.vip/aleph-17.htm
the boards are blue and THEY LOOK Awsome he did a gret job ill be buying more too.. started adding components lastnight too..
the boards are blue and THEY LOOK Awsome he did a gret job ill be buying more too.. started adding components lastnight too..
Member
Joined 2002
Member
Joined 2002
- Status
- Not open for further replies.