Help repairing Punch 250a2 amp

[xtrmskier]

Hi, I just joined the forum. I've got a punch 250a2 amp that I'd like to repair. the board lists this as a PC-2035-C (see attached photo). The power LED lights up when 12v is connected to the remote terminal. It appears like one of the capacitors may be bad (see photo). If I need additional parts I'd like to order as many of them at the same time. What other parts should I check? I've got a multimeter for checking volts and ohms. Let me know if additional photos would help. Thanks!

 

[Perry Babin]

That capacitor alone won't prevent the amp from functioning. If there is less than 1v of DC offset across each of the speaker output terminals, connect a speaker and signal source to see if the amp works.

 

[nec3]

You can first start with checking +HV and -HV.

This will help:

http://www.diyaudio.com/forums/car-...elp-repairing-2-punch-250a2s.html#post4632941