Hi all,
I'm in the process of alterations to my digital audio chain the new arrangements are :-
Box 1 bbb -> Hermes -> Cronus -> Teleporter
cat5 to Box 2 Teleporter -> Otto 11 -> B11/Ivy3
Power is Placid bp and LCDS
The Cronus/Teleporter in box 1 will be powered using the spare pair in the cat5
Question :- What are the basic principles and best practises for a grounding scheme for this sort of arrangement with multiple digital modules and power supplys.
Any opinions/thoughts would be appreciated.
Cheers, Steve
I'm in the process of alterations to my digital audio chain the new arrangements are :-
Box 1 bbb -> Hermes -> Cronus -> Teleporter
cat5 to Box 2 Teleporter -> Otto 11 -> B11/Ivy3
Power is Placid bp and LCDS
The Cronus/Teleporter in box 1 will be powered using the spare pair in the cat5
Question :- What are the basic principles and best practises for a grounding scheme for this sort of arrangement with multiple digital modules and power supplys.
Any opinions/thoughts would be appreciated.
Cheers, Steve
Last edited:
I presumed you wanted good advice so I didn't want to say anything...😀 Poorly done can lead to ground loops and shocks if something goes wrong.
Here is an old thread about multi chassis grounding. Like a friend, you have to sort the chafe from the grain.
http://www.diyaudio.com/forums/power-supplies/115698-understanding-star-grounding.html#post1403775
- Status
- Not open for further replies.