One of the things which seems to keep folks from using the LME49810 and the LM4780 is the tight spacing of the pins -- this "surfboard" measures 0.800 x 0.800 inches and the pinout would use a pair of 1x7 0.100" headers -- I will have to panelize them to get the cost down to a reasonable level -- let me know what you think.
With the surfboard you can solder right onto a Vectorboard or RS PC Prototyping board.
An externally hosted image should be here but it was not working when we last tested it.
With the surfboard you can solder right onto a Vectorboard or RS PC Prototyping board.
With the copper top illustrated:
An externally hosted image should be here but it was not working when we last tested it.
- Status
- Not open for further replies.