*** SOLD****
Tubelab SE project for sale items, free shipping to US:
(1) Tubelab SE populated board $90, configured for 300B, fully tested for few months, sounds good.
Use Mundorf Silver/Gold Solder, some Takman REY resistors, Auricap XO capacitors.
I will also include extra parts : one Sharp PQ5EV5 voltage regulator and one 2SK3563 FET.
You still need power transformer, output transformers, potentiometer, choke(or 150 Ohm 5W) and tubes to complete the project.
(2) Edcor XPWR131-120 power transformer $67.
120 V to 330-260-0-260-330 V, 5V CT 3A, 6.3V CT 4A; good for 300B or 2A3 build.
(3) Raytheon 5842 WA pair for Tubelab SE, $35.
Note : Tubelab SE is not a simple project for beginner. Please read the assembly manual from Tubelab.com first.
Follow the step (7) Checkout and (8) Setting Bias to power up the amp.
Last photo shows the SE board in testing configuration.
Tubelab SE project for sale items, free shipping to US:
(1) Tubelab SE populated board $90, configured for 300B, fully tested for few months, sounds good.
Use Mundorf Silver/Gold Solder, some Takman REY resistors, Auricap XO capacitors.
I will also include extra parts : one Sharp PQ5EV5 voltage regulator and one 2SK3563 FET.
You still need power transformer, output transformers, potentiometer, choke(or 150 Ohm 5W) and tubes to complete the project.
(2) Edcor XPWR131-120 power transformer $67.
120 V to 330-260-0-260-330 V, 5V CT 3A, 6.3V CT 4A; good for 300B or 2A3 build.
(3) Raytheon 5842 WA pair for Tubelab SE, $35.
Note : Tubelab SE is not a simple project for beginner. Please read the assembly manual from Tubelab.com first.
Follow the step (7) Checkout and (8) Setting Bias to power up the amp.
Last photo shows the SE board in testing configuration.
Attachments
Last edited: