• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Pass Labs Parts Lot Caps, Toroids, Parts

Status
Not open for further replies.
I have been totally out of the amp building hobby for about 5 years now and have been moving these pieces and parts from place to place in the mean time. Please someone make me an offer on part, all, or any of this stuff.

8ea of the 2003 DAH output boards designed for 6 Fets each never used.
2ea brand new Aleph-X rev 1.0 boards.
2ea Mini Aleph BrianGT boards that have been used.
16ea 34,000 uF 40vDC Caps
12ea Large Extruded Heatsinks
12ea Small Extruded Heatsinks
12ea Dale RH-50 50w .412 ohm 1% Resistors
4ea 625va Avel Lindberg Toroids 25v
1ea Smaller, maybe 250va 15v toroid
a few IRF9610's
9ea IRF9610L's
About 50ea IRFP240's
A few IR 452XB rectifiers.
75 - 90ea 0.47 ohm 3w 5% Metal Oxide
10ea STM CL-60 Thermistors
2ea 10A circuit breaker power switches.
2ea Neutrik Powercon Male
4ea Neutrik Powercon Female
4ea very high quality binding posts
There are also some female RCA jacks and XLR jacks, switches, fuse holders, and cheap binding posts along with a lot of small component pieces that have never been touched.

I'm in Fort Wayne, IN and will drive 2 hours to meet whomever to rid my self of this stuff. I wish I had the passion and know how that I expected to have when I made these purchases in college, but I've since become a home automation programmer (Crestron) and have left DIY Audio. I really don't have anymore information than what I listed since it's been so long since I've looked at any electronics, but hopefully the pictures fill in the gaps.

IMG_7606.jpg

IMG_7607.jpg

IMG_7608.jpg

IMG_7609.jpg

IMG_7610.jpg

IMG_7611.jpg

IMG_7612.jpg

IMG_7613.jpg

IMG_7599.jpg

IMG_7600.jpg

IMG_7601.jpg

IMG_7602.jpg

IMG_7603.jpg
 
The big toroids are $50 the little one is $30. The heatsinks and caps, just make me an offer.
What's reasonable, $10 each?

I already sold the following items:

2ea brand new Aleph-X rev 1.0 boards.
1- 625va Avel Lindberg Toroids 25v
ALL IRF9610's
ALL IRF9610L's
ALL 50ea IRFP240's
ALL 0.47 ohm 3w 5% Metal Oxide
ALL Dale RH-50 50w .412 ohm 1% Resistors
ALL STM CL-60 Thermistors
 
I still have th following available:

8ea of the 2003 DAH output boards designed for 6 Fets each never used.
2ea Mini Aleph BrianGT boards that have been used.
16ea 34,000 uF 40vDC Caps
12ea Large Extruded Heatsinks
12ea Small Extruded Heatsinks
3ea 625va Avel Lindberg Toroids 25v
1ea Smaller, maybe 250 to 300va 15v toroid
2ea 10A circuit breaker power switches.
2ea Neutrik Powercon Male
4ea Neutrik Powercon Female
4ea very high quality binding posts

There are also some female RCA jacks and XLR jacks, switches, and cheap binding posts.
 
How Much for Your women...I mean how much for the heat sinks . I saw your list this morning went to your website,quite nice I might add then I saw your post on The Pass Pub...BTW how much for the cl60's??

Regards, Elwood
 
How Much for Your women...I mean how much for the heat sinks . I saw your list this morning went to your website,quite nice I might add then I saw your post on The Pass Pub...BTW how much for the cl60's??

Regards, Elwood

It looks like everything is sold. I received payment for the items listed on this thread yesterday at 8:09 PM. The rest of the items are pending payment, but appear to be sold.

What website?
Funny stuff over there in the Pub, yeah?
 
Status
Not open for further replies.