• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS or Trade: Many Items

Hello,

I am selling multiple items. I would consider trades, though there's not a lot that I need.

- (2) Tectonic TEBM65C20F-8 drivers. Like new condition, used for 10 hours.

- Random parts (presumably none are valuable enough to ship individually, but make good throw in items or sold as a lot):
(1) ACA heatsink - never used though attempted assembly, one mount hole got trashed--to use hole you would need the enlarge & thread
(1) NEW TPA3125 integrated circuit
(4) NEW Parts Express gold extra long binding posts (091-340)
(2) NEW Parts Express dual gold binding posts (091-335)
(1) NEW unknown 1/4" headphone jack
(1) NEW NKK S339R dpdt toggle switch
(1) NEW Jameco MTS-2 dpdt mini toggle switch with flat actuator
(1) NEW unknown dpdt mini toggle switch with round actuator
(1) NEW unknown XLR connector
(2) NEW Dynakit RCA-1-M retro plastic jacks
(1) 3+1 terminal lug
(2) USED Harman and Kardon RCA jumpers
(1) USED Bourns 50k potentiometer (used for a single test)
(1) NEW Corcom 10CE1 power inlet with rocker switch
(1) NEW Bourns 3386 trimmer
(2) NEW red LEDs
Random high quality resistors and capacitors

I can provide pics for anything, just ask. Thanks
 

Attachments

  • IMG_20200224_204630.jpg
    IMG_20200224_204630.jpg
    508.7 KB · Views: 1,127
  • IMG_20200224_204609.jpg
    IMG_20200224_204609.jpg
    574.2 KB · Views: 1,112
  • IMG_20200224_204311.jpg
    IMG_20200224_204311.jpg
    346.5 KB · Views: 1,088
  • IMG_20200224_204738.jpg
    IMG_20200224_204738.jpg
    922.3 KB · Views: 1,070
  • IMG_20200224_204235.jpg
    IMG_20200224_204235.jpg
    435.6 KB · Views: 1,039
  • IMG_20191115_045302.jpg
    IMG_20191115_045302.jpg
    949.8 KB · Views: 235
  • IMG_20191115_045236.jpg
    IMG_20191115_045236.jpg
    532.4 KB · Views: 235
  • IMG_20191115_045712.jpg
    IMG_20191115_045712.jpg
    517 KB · Views: 218
  • IMG_20191115_045637.jpg
    IMG_20191115_045637.jpg
    413.2 KB · Views: 188
  • IMG_20191115_045501.jpg
    IMG_20191115_045501.jpg
    532.1 KB · Views: 182
Last edited:
I'm updating as things get sold and adding some others.
 

Attachments

  • IMG_20200318_160706.jpg
    IMG_20200318_160706.jpg
    200.5 KB · Views: 79
  • IMG_20200318_160804.jpg
    IMG_20200318_160804.jpg
    260.4 KB · Views: 92
  • IMG_20200318_160522.jpg
    IMG_20200318_160522.jpg
    364.6 KB · Views: 87
  • IMG_20200318_160851.jpg
    IMG_20200318_160851.jpg
    214.2 KB · Views: 86
  • IMG_20200318_160939.jpg
    IMG_20200318_160939.jpg
    182 KB · Views: 86
  • IMG_20200318_161017.jpg
    IMG_20200318_161017.jpg
    124.2 KB · Views: 86
  • IMG_20200318_161046.jpg
    IMG_20200318_161046.jpg
    160.6 KB · Views: 81
  • IMG_20200318_161106.jpg
    IMG_20200318_161106.jpg
    112 KB · Views: 94
  • IMG_20200318_160503.jpg
    IMG_20200318_160503.jpg
    439.3 KB · Views: 102
  • IMG_20200318_160439.jpg
    IMG_20200318_160439.jpg
    575.4 KB · Views: 143
So are all the parts there for it? Not talking about the rca and speaker jacks and so on
And what are you asking for all of it and shipping to Florida

It's a kit that I sourced and these are all of the main components. The pcb is already soldered with screw down terminals (soldered by inventor Tom Christensen). You still need the chassis, switch, potentiometer (if using), and connectors--I could throw in a switch, pot (used), and binding posts. It's a simple build that was very well received, instructions included.

I paid $482 for the components and over $60 for the stock of NOS tubes. How about $500 including shipping?
 
I have a chum who keeps talking about building a tube amp - what are you asking for the SPUD bundle, shipped to UK? I'll run it past him if it is attractive.

Shipping to the U.K. is not attractive. I'm guessing it weighs around 30 pounds. It might make more sense to sell board/tubes and source iron and such locally. Don't get me wrong, I would ship it all to U.K., but I think it would cost a fortune. Again, I will part out.
 
Shipping to the U.K. is not attractive. I'm guessing it weighs around 30 pounds. It might make more sense to sell board/tubes and source iron and such locally. Don't get me wrong, I would ship it all to U.K., but I think it would cost a fortune. Again, I will part out.

You're right. It would be a nice little project but not really cost effective as a complete bundle. Let's see if anyone else more local to you takes up the option of the bundle.