• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: BJT Monoblock Power Amps

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I've just about finished the new stereo power amp I have been working on, so I thought I'd see if there is any interest in my soon to be redundant pair of monoblocks.

I made these to be compact and robust. They use an 80VA toroid and two TIP2955 / 3055 transistor pairs per channel. All the electrolytic capacitors are Nichicon Muse, and the input capacitors are IMB polycarbonates. All resistors are Welwyn, and the PCB is a factory made double layer FR4 type of my own design. I can send anyone interested the schematic and bill of materials, but it's pretty similar to Rodd Elliot's P3 (see here).

Unfortunately, these have transformers with a single 230VAC primary, so are only suitable for 220 / 230 / 240VAC countries, unless you want to use a step up transformer.

I can ship it anywhere in the world, but if you're not in Australasia, it could be expensive.

It cost about USD300 to build these, so I'm looking for offers in the price range. I can include spares of the PCB this amp uses if the new owner wants to build more of them.
 

Attachments

  • M60a.jpg
    M60a.jpg
    68.9 KB · Views: 106
  • M60b.jpg
    M60b.jpg
    83 KB · Views: 104
  • M60c.jpg
    M60c.jpg
    100.7 KB · Views: 106
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.