I have a pair of Just Real Music ESL panels for sale. The stators measure 16" x 48" and are made of perforated powder coated steel. 1" wide double faced foam tape is holding the sandwich together
They are mounted in white ash frames.
Included are two multiplier HV supplies, the original step-up trafos, a pair of Plitron 50:1 step-ups and a pair of stands.
The panels were working when I last had them set up a year and a half ago, but they may need new membranes after sitting.
I paid $600 for the panels and $350 for the Plitron trafos, both new.
The panels will need to be crated for shipping, so I'm asking $50 extra to build same.
Will consider a reasonable offer. Photos are available if you are interested.
They are mounted in white ash frames.
Included are two multiplier HV supplies, the original step-up trafos, a pair of Plitron 50:1 step-ups and a pair of stands.
The panels were working when I last had them set up a year and a half ago, but they may need new membranes after sitting.
I paid $600 for the panels and $350 for the Plitron trafos, both new.
The panels will need to be crated for shipping, so I'm asking $50 extra to build same.
Will consider a reasonable offer. Photos are available if you are interested.
The panels are flat, sort of. There was a backbone running vertically down the centers which sort of made for a curved panel, but it was causing the center of the membranes to "buzz", so I removed it. And yes, they are very directional in the high end.
They measure 48 x 16 with an active area of 46 x 14.
They measure 48 x 16 with an active area of 46 x 14.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.