Crossover modification

lowpsiTSi

Member
2010-12-14 6:15 pm
I'm looking at building the HiVi Juniors project by Zaph. However, I'd like it to be an MTM setup. My question is, if I add another woofer in parallel with the first, I will get an R(eq) of 3.2 ohms. If I add a 3.1 ohm resistor in series to this to bring it back to 6.2, will I need to attenuate the tweeter by -3dB?

Schematic: http://www.parts-express.com/projectshowcase/hivijuniors/schematic.jpg