I would like to connect the X and later X2 to the balanced digital input of my DCX2496. besides a cable, do I need to convert the TeraLink to 110Ohms?
looking at the schematics I found on the web (attached), should I change the value of R10? to what value? in my unit it is 100R. should I remove the capacitor C17? in my unit it is .47.
looking at the schematics I found on the web (attached), should I change the value of R10? to what value? in my unit it is 100R. should I remove the capacitor C17? in my unit it is .47.
