• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Clearance sale /// All kinds of stuff

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.

Nikitas

Member
2011-11-11 9:13 am
I need to fund projects that I'm actually working on,
so I'm letting go of the following:

I have a backup Squeezebox touch, used a couple of times, in its box.
Taking offers.
----------------------------------------------------------------------

Subbu Dac and JG buffer
50£
----------------------------------------------------------------------

Asus PCIe D2X 5.1 soundcard
60£
----------------------------------------------------------------------

Demo boards
EVAL-SDP-CB1Z &EVAL-AD9838SDZ DDS 25£
PCM4104EVM 35£
Take both for 40 :)
----------------------------------------------------------------------

LDO
14* PCBs for ADM7150/1 LDO reg
1£/each

Breakboards of 12 PCBs (each) TPS7A4700
5£ (for each breakboard containing 12 PCBs)
----------------------------------------------------------------------
Bundle Power Supply
SSLV Transistor and caps
SSHV2: 2* Resistor Kit
2* Transistor Kit
SSHV: 2* Transistor kit
Reflektor-D kit including PCB, transistor and resistor kit
Power Resistors for use as load to test your SS** supplies
Some leftover parts: resistors, LEDs etc from kits that I didn’t use.
3* battery management kit (Ian’s fifo)
45£ all
----------------------------------------------------------------------

Transformers:
1* Hammond 2*117 2*15V @ 5,33A 20£
1* Giatras 1*230V 2*24V @ 11,2A shielded 20£
1* TRIAD 2*115V 2*6V 50VA 10£
----------------------------------------------------------------------
Analog VU meter
accepts amp or preamp input.
Assembled board, all you need is a transformer.
Unused, sold exactly as received.
10 pounds
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.