Can you change irf 130 for irf 240 on citation 12 original article.?
What I have to do in the schematic.
I am having problem getting the irf 130 her in mi country.
thanks
Ricardo
just trying.......
What I have to do in the schematic.
I am having problem getting the irf 130 her in mi country.
thanks
Ricardo
just trying.......
Sure you can! I used IRF3205 in my build, worked just fine. Though lateral mosfets may be better than hexfets.
Laterals will have less bias drift with temp, but generally
more distortion (lower transconductance).
Either is worth a try.
😎
more distortion (lower transconductance).
Either is worth a try.
😎
I am trying laterals, ordered a few from those class-d.com doodz making those class b modules.
Datasheet: http://jm.plantefeve.pagesperso-orange.fr/acd100nsd.pdf
At 3GBP a piece their among the cheapest laterals on the market.
I'm also planning to add current sources to the input and VAS stage, but more of that in my thread.
Datasheet: http://jm.plantefeve.pagesperso-orange.fr/acd100nsd.pdf
At 3GBP a piece their among the cheapest laterals on the market.
I'm also planning to add current sources to the input and VAS stage, but more of that in my thread.
Both design's from same brand ??
Magnatec. ALFET Lateral MOSFETs
TT electronics Semelab Limited - Magnatec Datasheets
TT electronics Semelab Limited - Magnatec Lateral MOSFET Pricing
Where are the P-spice parameters (I don't get reply from Magnatec) ??
My laterals arrived today!! I wonder why they have switchecd places on Drain and Source as compared to any other mosfet like IRFP450 and such.😕😕
about this thread I have make an overview arround lateral MOSFET's (vintage and currently available):
http://www.diyaudio.com/forums/soli...l-mosfets-class-ab-overview-p-spice-urls.html
highest level p-spice parameter highly appreciated
http://www.diyaudio.com/forums/soli...l-mosfets-class-ab-overview-p-spice-urls.html
highest level p-spice parameter highly appreciated
- Status
- Not open for further replies.