Check out and comment please

[audiobahnkid592]

I have not build to many sub boxs yet but this is my newest one. its 2.3^ft per chamber ported and tunned to 39 hrtz. The box measures 37.5W 16H and 19.5D. I designed, cut, built, designed the covering raised patterns by hand and then covered it my self. Now im still only 18 and still have a lot of learning to do but anyone and everyone comment and be honest on what you think about it all photos can be seen here:

http://s227.photobucket.com/albums/dd146/mxracer592/New 12 box/

 

[Clipped]

nice job, i would be too lazy too make the overlay myself...

what made you go with that port size?

 

[audiobahnkid592]

honestly im not sure why i did my old box i made the ports were 1.5wx8hx7.5dwhich got me to 37hrtz...the new woofers i bought move a little more air so i thought it would better to make them a little bigger to avoid possible port noise.

 

[jol50]

Looks nice, let us know how it sounds. Is that one port/one box? Oh wait I see it looks like a partition. It should work great, only thing I could think of is to round the port ends if you didn't.

 

[aznboi3644]

What subs are these...looks like too little port area to me.

Nice build though

 

[audiobahnkid592]

there going to be Audiobahn AW1206T's...reconmended port is a 4 inch round by 7.25"D

 

[junglejuice]

So what size port did you use?

 

[audiobahnkid592]

it ended up being 2Wx8Hx9D an i can always add lenth to the port if i dont like the tune

 

[aznboi3644]

Audiobahn only recommended a single 4 inch port because two would make the port longer than most people like.

 

[audiobahnkid592]

http://www.diyaudio.com/forums/showthread.php?s=&threadid=98018&highlight=

I built that box for my old one and the ports on that one were alot smaller but sounded great...
http://video.google.com/videoplay?d...=11&start=0&num=10&so=0&type=search&plindex=7

there isn't really any distortion the bass was just to much for the camera