This is the schematic of the amp:
http://www.milkbands.co.il/Pioneer-SA-7300-int-sch.pdf
They are two electrolytic caps number C49 and C50.
Can i replace them with Metalized Polypropylene?
http://www.milkbands.co.il/Pioneer-SA-7300-int-sch.pdf
They are two electrolytic caps number C49 and C50.
Can i replace them with Metalized Polypropylene?
Sure. You could easily get away with something cheaper though, if you have anything else lying around. Polyester or a new electrolytic. Those appear to be only a filter for protection response. When Q17,18 begin to conduct they will cause the output relay to open. The quality of the cap is pretty non critical.
- Status
- Not open for further replies.