• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Calling All Mullard 5-20 Aficionados

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Gents ~ I would appreciate a little feedback from anyone who has spent Time and Cash on the Passive Component Mix in the Mullard 5-20 circuit and who can comment on the following.

Capacitors~

Material Types and Brands used , together with perceived sonic benefits, if any , as derived from ones experimentation.

Resistors~

As above .

I would be grateful if peeps could be Quite Specific as to the location of the component ( preferably as listed per the component numeration in the original Mullard circuit diagram ) , Rather than a generalization such as in the "Signal Path" , "PSU" , "CR" etc etc.

Its always informative to listen to and learn from the experiences of those Intrepids who have Boldly gone before !

:)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.