Bones13 Sell Off -> SOLD OUT
I have finished my last project - an n channel VFET amp, which shares duties with a SissySIT r3.
Eyes are going, fingers less nimble, and looking to move across country, and won’t have the space that I enjoy now. I am selling many of these for shipping costs (rounding up and down to $10) Charging half as much for the SITs and VFETs to benefit the community. I bought from proven vendors, but have not tested these.
Anyway, I am going to unload a bunch of boards, VFET/SITs, unstarted and a mostly finished kit. All Vets were purchased from Spencer at DIYCircuit. SITs were obtained from Tomoaki Watanabe.
I am aiming to help the DIYAudio community, but I will prioritize requests from the people who have helped me in the past. Not doing a lottery like the initial VFET sets, but if you don’t have many posts, you will go down the list below folks I know for here, or see that are active here.
Finished boards
1 pair F6 boards, with only the MOS chips unmounted. ($50+$10)
Kits - not started
2 x Reflector power supply boards, and parts ($15+$10 / each)
Boards
1 pair P VFET OS2 boards, with pair of 2SJ28 ($75+$10)
1 pair N VFET OS2 boards, with pair of 2SK82 ($75+$10)
1 3-board set of Pequot Daughter boards ($10)
1 3-board set of Bon Homme Richard boards ($10)
3 single TUBA Boards ($10 / each)
5 single H9KPXG-C push button, slow start switch boards ($10 / each)
(3 will have the SMPS and SL22 parts)
Transistors
1 pair 2SK182E SIT ($50+$10)
1 pair THF-51S ($50+$10)
4 2SK180 (looks to have been recovered, sold as set for shipping $10)
1 pair Sony 2SJ28 ($50+$10)
3 pairs Sony 2SK82 ($50+$10 / pair)
I have finished my last project - an n channel VFET amp, which shares duties with a SissySIT r3.
Eyes are going, fingers less nimble, and looking to move across country, and won’t have the space that I enjoy now. I am selling many of these for shipping costs (rounding up and down to $10) Charging half as much for the SITs and VFETs to benefit the community. I bought from proven vendors, but have not tested these.
Anyway, I am going to unload a bunch of boards, VFET/SITs, unstarted and a mostly finished kit. All Vets were purchased from Spencer at DIYCircuit. SITs were obtained from Tomoaki Watanabe.
I am aiming to help the DIYAudio community, but I will prioritize requests from the people who have helped me in the past. Not doing a lottery like the initial VFET sets, but if you don’t have many posts, you will go down the list below folks I know for here, or see that are active here.
Finished boards
1 pair F6 boards, with only the MOS chips unmounted. ($50+$10)
Kits - not started
2 x Reflector power supply boards, and parts ($15+$10 / each)
Boards
1 pair P VFET OS2 boards, with pair of 2SJ28 ($75+$10)
1 pair N VFET OS2 boards, with pair of 2SK82 ($75+$10)
1 3-board set of Pequot Daughter boards ($10)
1 3-board set of Bon Homme Richard boards ($10)
3 single TUBA Boards ($10 / each)
5 single H9KPXG-C push button, slow start switch boards ($10 / each)
(3 will have the SMPS and SL22 parts)
Transistors
1 pair 2SK182E SIT ($50+$10)
1 pair THF-51S ($50+$10)
4 2SK180 (looks to have been recovered, sold as set for shipping $10)
1 pair Sony 2SJ28 ($50+$10)
3 pairs Sony 2SK82 ($50+$10 / pair)
Last edited:
In for a pair VFET OS2 boards with 2SJ28s or a pair of 2SJ28 alone… thanks! I’ve had a WTB up forever 🙏🏻
Last edited:
I’m going to take names and requests (with times) and organize them tomorrow, checking the thread here, and the PMs. go ahead with requests here and on PM. Be patient tonight please.
Gentlemen…
As everybody looking at this knows every single item is priced too low, please don't bicker or try to bargain, make sure actual shipping costs are reimbursed, and Please, Pretty Please, no hoarders and for golly’s sake actually build whatever you buy.
As everybody looking at this knows every single item is priced too low, please don't bicker or try to bargain, make sure actual shipping costs are reimbursed, and Please, Pretty Please, no hoarders and for golly’s sake actually build whatever you buy.
Quick summary of reservations, and I will bold what is left
Finished boards
1 pair F6 boards, with only the MOS chips unmounted. ($50+$10) - reserved
Kits - not started
2 x Reflektor power supply boards, and parts ($15+$10 / each)
Boards
1 pair P VFET OS2 boards, with pair of 2SJ28 ($75+$10) - reserved
1 pair N VFET OS2 boards, with pair of 2SK82 ($75+$10) - reserved
1 3-board set of Pequot Daughter boards ($10) - reserved
1 3-board set of Bon Homme Richard boards ($10) - reserved
3 single TUBA Boards ($10 / each) - one is reserved
5 single H9KPXG-C push button, slow start switch boards ($10 / each) - reserved
2 BiB Salas Shunt Boards - reserved
Transistors
1 pair 2SK182E SIT ($50+$10) - reserved
1 pair THF-51S ($50+$10) - reserved
4 2SK180 (looks to have been recovered, sold as set for shipping $10) - reserved
1 pair Sony 2SJ28 ($50+$10) - reserved
3 pairs Sony 2SK82 ($50+$10 / pair) - reserved
Every thing went pretty fast. Keep watch on your PM. I will announce if any of the sales fall through.
Thanks for the interest.
Finished boards
1 pair F6 boards, with only the MOS chips unmounted. ($50+$10) - reserved
Kits - not started
2 x Reflektor power supply boards, and parts ($15+$10 / each)
Boards
1 pair P VFET OS2 boards, with pair of 2SJ28 ($75+$10) - reserved
1 pair N VFET OS2 boards, with pair of 2SK82 ($75+$10) - reserved
1 3-board set of Pequot Daughter boards ($10) - reserved
1 3-board set of Bon Homme Richard boards ($10) - reserved
3 single TUBA Boards ($10 / each) - one is reserved
5 single H9KPXG-C push button, slow start switch boards ($10 / each) - reserved
2 BiB Salas Shunt Boards - reserved
Transistors
1 pair 2SK182E SIT ($50+$10) - reserved
1 pair THF-51S ($50+$10) - reserved
4 2SK180 (looks to have been recovered, sold as set for shipping $10) - reserved
1 pair Sony 2SJ28 ($50+$10) - reserved
3 pairs Sony 2SK82 ($50+$10 / pair) - reserved
Every thing went pretty fast. Keep watch on your PM. I will announce if any of the sales fall through.
Thanks for the interest.
Last edited:
Everything accounted for so far, I will post if anything does not work out. Again, thanks for interest.
Michael
Michael
Everything has sold, with payments completed. I’ll be organizing the shipping through the week. This all went faster than I expected.
Thank you all!
Thank you all!
All boxed up, and addressed. I will be by the Post Office on Friday to mail them.
Thanks again all.
All payments complete, all boxes sent. Most of you guys in the US will get them middle of next week.
Thanks to all that bought my stuff!
Thanks to all that bought my stuff!
Oh man. We should be thanking you. I am hoping that you being so generous with your pricing will help a few guys get the chance to play around these parts who wouldn't have otherwise been able to.
I’ve been here more than 15 years now. It’s been a great run.
I started with DIY speakers in 1977, that went to college with me. They were reformulated (WAF matters!) when in medical school / residency. (They got smaller) A bunch of years passed as I got my medical practice started. Then I built a couple of kits - AudioNoteKits EL34 + DAC 4.1. Had a lot of fun with those. Moved away from tubes, and built an Aleph J clone, completely new experience, with some Zu Essence speakers. Some failed experiments with DIY DACs… M2x, and SissySIT (replacing the Aleph J) sounding good. Final project being an N-Channel VFET amp.
It’s been FUN!
Moving on though. planning to retire at the end of 2024, and downsizing, again, in a move to Seattle, to be with daughter + newest grand daughter. Space will be tight, just hoping to keep my vinyl rig (vinyl storage can be problematic)
I plan to pursue other hobbies, listening to music, and do a fair amount of babysitting/child care.
I started with DIY speakers in 1977, that went to college with me. They were reformulated (WAF matters!) when in medical school / residency. (They got smaller) A bunch of years passed as I got my medical practice started. Then I built a couple of kits - AudioNoteKits EL34 + DAC 4.1. Had a lot of fun with those. Moved away from tubes, and built an Aleph J clone, completely new experience, with some Zu Essence speakers. Some failed experiments with DIY DACs… M2x, and SissySIT (replacing the Aleph J) sounding good. Final project being an N-Channel VFET amp.
It’s been FUN!
Moving on though. planning to retire at the end of 2024, and downsizing, again, in a move to Seattle, to be with daughter + newest grand daughter. Space will be tight, just hoping to keep my vinyl rig (vinyl storage can be problematic)
I plan to pursue other hobbies, listening to music, and do a fair amount of babysitting/child care.
Yeah, ultimately, enjoyment of music or this/that comes down to context and sharing it with someone makes it all the richer without pursuing the n-th degree in whatever parameter that people have decided is the new end all be all.. all the best, and thanks for your generosity kicking components back into The Community...