• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Blame DX assembled blue PCB's

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.

passive420

Member
2013-06-11 3:39 pm
These DX boards were on ebay as I sense people here do not really like buying pre-built amp PCB's sometimes. But I will see if anybody is interested.

A pair of working Blame DX amplifier PCB's from Carlos fitted with single pairs of Sanken output devices. No damage to boards or any issues.

The boards can be configured for ES, ST or supercharged type. They are at present are configured for ST.

Populated with top quality audio components:

Dale 1% resistors
Sanken output transistors.
Panasonic, Elna and Wima caps
Mills MR05 5 watt non inductive outpout and emitter resistors.

Boards come with a pair of aluminium plates to help mount to heatsink.

SOLD


Also available is a custom 2 x 25-0-25 350VA dual winding CT toroid manufactured by Canterbury Windings that is ideal for these amp boards. Professional Audio grade quality with screen and GOSS band, made by one of the finest in England.

Toroid: £60 plus shipping
 

Attachments

  • $_57.JPG
    $_57.JPG
    218.5 KB · Views: 170
  • $_57 (3).JPG
    $_57 (3).JPG
    197.5 KB · Views: 165
  • $_57 (2).JPG
    $_57 (2).JPG
    219.1 KB · Views: 160
  • $_57 (1).JPG
    $_57 (1).JPG
    164.4 KB · Views: 158
  • 1.jpg
    1.jpg
    87 KB · Views: 145
  • 2.jpg
    2.jpg
    52.5 KB · Views: 65
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.