This amp is using P60NF06's for the power supply fets with 47 ohm gate resistors.
Is there a good sub for the P60NF06's?
Is there a good sub for the P60NF06's?
The stp60nf06 is readily available. If you don't want to use them because you'll have to order them, list what you have on hand.
Im checking the power supply drivers .
The MMBT3906 (2A) reads 52.4 ohms from collector to emitter. This is out of the amp. Defective?
The MMBT3906 (2A) reads 52.4 ohms from collector to emitter. This is out of the amp. Defective?
sorry to hit this thread like this.....does anyone have the schematic for this amp..i found one part numbered q14 damaged along with the outputs of course and need help with a possible replacement.
thanks guys i'll order it and let you know what happens.probably in the next week or so ...living in a third world country has is cons..lol
ok guys i got some of the smt's from a donor amp...it seems one is npn and one pnp since the amp has a mirror circuit on the other side any ways long story short i started her up with one output fet in each rail and it powered up fine and played an eight ohm load on low volume so now all i have to do is get the irf640 and i should be ok.
thanks a bunch for your help guys i'll be back with a fosgate thats driving me nuts.
thanks a bunch for your help guys i'll be back with a fosgate thats driving me nuts.
- Status
- Not open for further replies.