any plans for 3 way-fullrange PA enclosures using eminence drivers?

[pikcellmix]

Hello all .

Im interested in building a pair of 3 way loud speakers using 18mm/13ply baltic birch wood with the eminence drivers listed below. Im new at this but I want this to be a learning experience. I plan on using these Loud speakers for Dance music and Rock shows with the help of a few subs of course 😉

Any one know of or have links to good enclosure plans suitable for these components?

1 x kappa 15LF - Low freq driver.

1 x PSD2002 - Comp. driver + SST1 or H295 HORN LENS 90x40

1 x Delta 10A - Mid Range driver

I chose these components because they are affordable and Ive been told that they are good quality for the money. I would appreciate any suggestions to affordable alternatives.

I will probably use an active crossover but if anyone knows of a suitable off the shelf passive crossover , please forward any links/info you have.


Thanks in advance..

This forum is awesome BTW..

Oscar

 

[titoon]

Sorry for the delay: I builded this system 3-way Mogale ROG: DM-2