Had a search and haven't found anything relevant. I fitted a 3566 6 channel amplifier today to replace my Flex 5 (mrp-f356) so that i could have a dedicated subwoofer pre-amp input rather than a derived one. Problem is i don't have the manual so don't fully know what does what.
If no-one has a manual for it, can anybody tell me what the acoustic compensation switch does and what the proper input mode is when bridging the sub channels (5 and 6). Presently i've got compensation set to off and the input mode set to mono (L) The sub input is stereo coming from an alpine 3672 dividing network.
EDIT:
Scratch that, I found both the user manual and the service manual after a lot of hunting.
If no-one has a manual for it, can anybody tell me what the acoustic compensation switch does and what the proper input mode is when bridging the sub channels (5 and 6). Presently i've got compensation set to off and the input mode set to mono (L) The sub input is stereo coming from an alpine 3672 dividing network.
EDIT:
Scratch that, I found both the user manual and the service manual after a lot of hunting.
Last edited: