Hi guys,
I am going to start the project on Airport express.
As Micromega, I would like to get the low noise shunt regulator and master clock for this.
Found that there have 2 25MHz crystal there. When I read some of the notes about the WM-10. It shown one of them which for the 88F6-BGH2 have been mod.
I would like to ask for the advise and suggestion on the 3.3V regulator as the PSU of this. The original switching supply have 1.3A 3.3V output. Please free to give suggestion to me, thanks!!
PS: It is really hard to open the case of it.... ^^
I am going to start the project on Airport express.
As Micromega, I would like to get the low noise shunt regulator and master clock for this.
Found that there have 2 25MHz crystal there. When I read some of the notes about the WM-10. It shown one of them which for the 88F6-BGH2 have been mod.
I would like to ask for the advise and suggestion on the 3.3V regulator as the PSU of this. The original switching supply have 1.3A 3.3V output. Please free to give suggestion to me, thanks!!
PS: It is really hard to open the case of it.... ^^
Attachments
matcc, just see the two thread I created:
Modification Airport Express (Zardoz, Rosita, Airstream...) - Sources
http://www.diyaudio.com/forums/digi...ic-server-improved-apple-airport-express.html
It works great.
Modification Airport Express (Zardoz, Rosita, Airstream...) - Sources
http://www.diyaudio.com/forums/digi...ic-server-improved-apple-airport-express.html
It works great.
- Status
- Not open for further replies.