• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

8 pin solid state rectifier RT 515 in Tubelab simple SE

Er der nogen som har erfaring med at erstatte ensretterrøret 5AR4 med en 8 pin solid state rectifier RT 515i en Tubelab simple SE power forstærker med El 34 monteret. Jeg har rørt 5AR4 monteret i 8 pin octal sokkel for tiden, men ønsker at prøve med solid state rectifier i 8 pin octal sokkel hvor rør normalt sidder. Jeg har ikke loddet dioder i printet og har kun 8 pin octal løsningen tilrådighed.
16590414488993818983236462799082.jpg
 

rayma

Member
2011-04-29 8:37 pm
Er der nogen som har erfaring med at erstatte ensretterrøret 5AR4 med en 8 pin solid state rectifier RT 515i en Tubelab simple SE power forstærker med El 34 monteret. Jeg har rørt 5AR4 monteret i 8 pin octal sokkel for tiden, men ønsker at prøve med solid state rectifier i 8 pin octal sokkel hvor rør normalt sidder. Jeg har ikke loddet dioder i printet og har kun 8 pin octal løsningen tilrådighed.
In English, please.
 
  • Like
Reactions: 1 user
In English, please.
Does anyone have experience replacing the rectifier tube 5AR4 with an 8 pin solid state rectifier RT 515i a Tubelab simple SE power amplifier with El 34 fitted. I have piped 5AR4 mounted in 8 pin octal socket for the time being, but want to try with solid state rectifier in 8 pin octal socket where tubes normally sit. I have not soldered diodes in the printed circuit and only have the 8 pin octal solution available.