So I have these from trying to design a car system but I think I may just us the Dayton Reference drivers I have in my car.
Bliesma T25A and S
Audiofrog GB25
Purifi PTT6.5x 8 ohm
Thinking I could build a small powered pair of speakers. Also have a pair of SLS 6.5 if those make more since.
Should be able to design a speaker ending with a sensitivity of 82db a 1 watt that can handle around 100 rms 300 max. Think that's pretty good for the size but I may be off base, why I'm here.
Would any of you consider building this? Active or passive? Thanks for your time and thoughts.
Bliesma T25A and S
Audiofrog GB25
Purifi PTT6.5x 8 ohm
Thinking I could build a small powered pair of speakers. Also have a pair of SLS 6.5 if those make more since.
Should be able to design a speaker ending with a sensitivity of 82db a 1 watt that can handle around 100 rms 300 max. Think that's pretty good for the size but I may be off base, why I'm here.
Would any of you consider building this? Active or passive? Thanks for your time and thoughts.
GB25 specs and link to 3rd party measurements.
- Revc: 2.3 Ω
- Levc@1kHz: 0.06 mH
- Sd: 26.4 cm²
- Mmd: 3.34 g
- Mms: 3.42 g
- Cms: 256 µM/N
- Vas: 0.26 liters
- Fs: 170 Hz
- BL: 3.4 TM
- Qms: 4.8
- Qes: 0.75
- Qts: 0.65
- Xmax (1-way linear): 4 mm (3/16”)
- Basket Displacement: 0.06 liters (0.002ft³)