Hi everyone:
I'm changing the resistors on my Chipamp.com dual mono LM3886 boards in order to reduce the gain.
For that, I need to find some 19.6k or 20k 2W axial resistors (preferably 2% or better). I'll setttle for 1W if I have to, but would prefer 2W. I want only new parts.
I'm in the Toronto, Canada area. Active Components, Digi-Key, Mouser and a couple other places I've tried do not have any in stock matching these specs.
Where would you all suggest I try next?
I'm changing the resistors on my Chipamp.com dual mono LM3886 boards in order to reduce the gain.
For that, I need to find some 19.6k or 20k 2W axial resistors (preferably 2% or better). I'll setttle for 1W if I have to, but would prefer 2W. I want only new parts.
I'm in the Toronto, Canada area. Active Components, Digi-Key, Mouser and a couple other places I've tried do not have any in stock matching these specs.
Where would you all suggest I try next?
Several 1W brands are here. resistors_main page
Also this 5W one. Mills MRA-5 Resistors
MILLS-64701 20K / 5 Watt, MRA5, 1%, 20ppm, Axial Leads, Non Inductive, Wirewound, Each $5.25
Last edited:
Searching Digikey from the left side of the pond must be much more difficult than from the right side, since it took me about 10 seconds to find these:
MOX5002002GSE Ohmite | Resistors | DigiKey
This is thick film, 6 or 7 more wirewound types, 3W and 5W.
You can try Supremetronic in the Home Hardware at College and Spadina. Sayal or Electrosonic by Victoria Park and Gordon Baker. And there are a bunch of electronic component stores at Dixie and Matheson in Mississauga. Otherwise eBay from China.
How many do you need? I have 20+ 20k 3W 1% resistors in my stock, too.
How many do you need? I have 20+ 20k 3W 1% resistors in my stock, too.
- Status
- Not open for further replies.