• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

12K low watt OPT for PP or Parafeed

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I've got an extra set of Electra-print OPT's. I don't know the exact power rating, but they are probably about 2-4W units. They are 12K at 8 ohm, with a center tap on the secondary, so they can be used in PP or SE applications. I have another pair on a low power 801 amp and they work very will in sound and measured response. They were $150 for the pair. For half that they are yours.

Sheldon
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.