tannoy hpd295/8
This is also called the Tannoy Gold?
I did a miniOnken for those, using specs i had to measure. I have found measured numbers do not get me to the proper size cabinet as if starting from good factory numbers.
The cabinet turned out to be too small (or noit tuned low enuff), they sounded decent, somewhat overemphasized at the bottom, i am sure the original XO committed many sins.
Trying agai, with a larger cabinet, would take some guessing. Might need a bit of vent tuning.
The additional data GM posted should help.
dave
Last edited:
Maybe I should try with Japanese cornetta reviewed in 6moons
plans are here
https://www.hilberink.nl/codehans/tannoy158.htm
It is bigger than monitor enclosure but maybe only way to go
as bass reflex with pleased result
Zoran
plans are here
https://www.hilberink.nl/codehans/tannoy158.htm
It is bigger than monitor enclosure but maybe only way to go
as bass reflex with pleased result
Zoran
I don’t know if it was ever built. Wouild require 4 x Alpair 10.2.
Colin did build the original rectangular for the A10(.1).
They have a false bottom, so as tall as you’d like. The Trapezoids are taller, the one for the A10.2 x 2 is just over a metre. That would work size wize for teh A10p, rthe A10.3 or MAOP 10.2 would be about 13/17ths the height (vents would need to change in both cases)
The driver smost often used in the microTower have more bass extention potential (how much depends somewhat on the driver used), and the cabinet is desogned top push bass extention. Probably lower than any MK10-something except for the A10.2 which was the bass extention champ which might go as low — until the A12pw came out.
dave
Colin did build the original rectangular for the A10(.1).
They have a false bottom, so as tall as you’d like. The Trapezoids are taller, the one for the A10.2 x 2 is just over a metre. That would work size wize for teh A10p, rthe A10.3 or MAOP 10.2 would be about 13/17ths the height (vents would need to change in both cases)
The driver smost often used in the microTower have more bass extention potential (how much depends somewhat on the driver used), and the cabinet is desogned top push bass extention. Probably lower than any MK10-something except for the A10.2 which was the bass extention champ which might go as low — until the A12pw came out.
dave
Could you explain the 'subscription' plan. I'm a bit confused as to why I'd need a subscription to a schematic rather than just buying it, or is it just semantic?
It may be best to use a figurative example. Let's say I'm interested in a MA CHN-50 version to build, or rather convert to a 3D printable version. What do I need to fork out to get the schematics?
It may be best to use a figurative example. Let's say I'm interested in a MA CHN-50 version to build, or rather convert to a 3D printable version. What do I need to fork out to get the schematics?
These are sharp.
They have a false bottom, so as tall as you’d like.
I’m wondering about the best way to elongate my microTower build. False bottom or on a heavy plinth.
to elongate my microTower build
MicroTower uses the floor. So you could well lose bottom if you add a fake bottom.
dave
- Home
- More Vendors...
- Planet 10 hifi
- planet10-hifi miniOnken Plan-Set Subscriptions