SpeakerProjectTemplate
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

SpeakerProjectTemplate

Name<Project/Speaker Name>
Type<Subwoofer, Dipole, Multi, Electostatic etc>
Application<PA, Reference, waking the neighbors...>
Speaker Count<1-1,00,000>
Approx Cost100,000,000 GBP
Designer<Original Designer>
Thread<URL to the discussion thread>

The Project

Introduction

Give a brief [1-2 paragraph] description of your speaker design, possibly including what inspired your design.

Goals

What were some of your goals with the design of the speakers? In the end, did you achieve them? If not, where did the design fall short of your expectations?

examples: I wanted to create a speaker with perfect tonality but ended up with something that sounded like it plays under water.

Specifications


NameDescription
Freq Range<eg -6dB at 27Hz and 33kHz>
Freq Response<eg 34Hz – 28kHz ±3dB on reference axis>
Dispersion<eg - Within 6db of reference response>
Horizontal<eg - 60 degree arc>
Vertical<eg - 10 degree arc>
Sensitivity<eg - 90dB spl (2.80v, 1m)>
Harmonic Distortion%THD or plot
Nominal Impedance<eg - 8 Ohm, min 2Ohms>
Crossover Points<eg - 300Hz, 4KHz>
Power Handling<eg 50-250W>
Dimensions<eg - 60x12x16 in (HxWxD) >
Approx Weight<eg - 40kg (88 lbs)>
Recommended Materials<eg - MDF, Birch Ply>

Schematic/Blueprint

Please attach schematics to this wiki page. You can then use the [IMG] tag to display them inline. Please don't be afraid to attach Gerber files to the page as well.

Note: There is a bug in the wiki right now where you can't add attachments to a wiki after 30 minutes.

Bill of Materials

Either list them in this section or attach a file to the page that people can download.

Note: If this project uses other projects as components (maybe a crossover/amp/driver from another thread or wiki, please list them here).

Simulations and Analysis

Embed the images for your simulations here along with descriptions for each of them so people know what you're talking about.

Construction (Steps / Tips / Notes)

Is there anything peculiar about the design that a builder might want to know about? List them here? Or do you just want to give us a step-by-step build plan; that works too.

Project Modifications

Do you have some small modifications to suggest for the project that could improve it? Please list them and tell us why they improve the design. If this is discussed in a thread, please link the thread URL here....

Modification 1

Cross the streams!

Modification 2

Install a flux capacitor!


Reviews

Review 1

Thumps!

Review 2

Music to my ears!

Build Threads


Have you built this project? If so, please add the URL to the thread that you started to show off your build.
  • URL to my uber build 1 thread
  • URL to my super dooper build 2 thread!!!

Related Group Buys

  • Thread 1234
  • GroupBuy:XO1234

Code for this template (copy/paste)

To create a new amplifier project, simply copy the text below, create a new wiki page/article (preferably with the name Speaker:ProjectName) and paste the text into your new page. Voila!

Code:
[TABLE] | border="0" cellspacing="5"
|-
| [B]Name[/B] || <Project/Speaker Name>
|-
| [B]Type[/B] || <Subwoofer, Dipole, Multi, Electostatic etc>
|-
| [B]Application[/B] || <PA, Reference, waking the neighbors...>
|-
| [B]Speaker Count[/B] || <1-1,00,000>
|-
| [B]Approx Cost[/B] || 100,000,000 GBP
|-
|
|-
| [B]Designer[/B] || <Original Designer>
|-
| [B]Thread[/B] || <URL to the discussion thread>
|-
[/TABLE]

[H="1"]The Project[/H]

[H="2"]Introduction[/H]

Give a brief [1-2 paragraph] description of your speaker design, possibly including what inspired your design.

[H="2"]Goals[/H]

What were some of your goals with the design of the speakers? In the end, did you achieve them? If not, where did the design fall short of your expectations?

examples: I wanted to create a speaker with perfect tonality but ended up with something that sounded like it plays under water.

[H="2"]Specifications[/H]
[TABLE] border="0" cellpadding="2" cellspacing="0"
|-
| class="tcat" | Name
| class="tcat" | Description
|-
| Freq Range || <eg -6dB at 27Hz and 33kHz>
|-
| Freq Response || <eg 34Hz – 28kHz ±3dB on reference axis>
|-
| Dispersion || <eg - Within 6db of reference response>
|-
| Horizontal || <eg - 60 degree arc>
|-
| Vertical|| <eg - 10 degree arc>
|-
| Sensitivity || <eg - 90dB spl (2.80v, 1m)>
|-
| Harmonic Distortion || %THD or plot
|-
| Nominal Impedance || <eg - 8 Ohm, min 2Ohms>
|-
| Crossover Points || <eg - 300Hz, 4KHz>
|-
| Power Handling || <eg 50-250W>
|-
| Dimensions || <eg - 60x12x16 in (HxWxD) >
|-
| Approx Weight || <eg - 40kg (88 lbs)>
|-
| Recommended Materials || <eg - MDF, Birch Ply>
|-

[/TABLE]


[H="2"]Schematic/Blueprint[/H]

Please attach schematics to this wiki page. You can then use the [IMG] tag to display them inline. Please don't be afraid to attach Gerber files to the page as well.

Note: There is a bug in the wiki right now where you can't add attachments to a wiki after 30 minutes.

[H="2"]Bill of Materials[/H]

Either list them in this section or attach a file to the page that people can download.

Note: If this project uses other projects as components (maybe a crossover/amp/driver from another thread or wiki, please list them here).

[H="2"]Simulations and Analysis[/H]

Embed the images for your simulations here along with descriptions for each of them so people know what you're talking about.

[H="1"]Construction (Steps / Tips / Notes)[/H]

Is there anything peculiar about the design that a builder might want to know about? List them here? Or do you just want to give us a step-by-step build plan; that works too.

[H="2"]Project Modifications[/H]

Do you have some small modifications to suggest for the project that could improve it? Please list them and tell us why they improve the design. If this is discussed in a thread, please link the thread URL here....

[H="3"]Modification 1[/H]

Cross the streams!

[H="3"]Modification 2[/H]

Install a flux capacitor!



[H="1"]Reviews[/H]

[H="2"]Review 1[/H]

Thumps!

[H="2"]Review 2[/H]

Music to my ears!


[H="1"]Build Threads[/H]


Have you built this project? If so, please add the URL to the thread that you started to show off your build.

[LIST]
[*]URL to my uber build 1 thread
[*]URL to my super dooper build 2 thread!!!
[/LIST]


[H="1"]Related Group Buys[/H]
[LIST]
[*]Thread 1234
[*]GroupBuy:XO1234
[/LIST]

This page has been seen 2,573 times.

Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 02:38 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
"Wiki" powered by VaultWiki.
Wiki