You have no items in your cart.

Currency

Universal PSU V3

Availability: In stock

Only 2 left

$29.00

Discounts!

  • Order 2 and get 5% off
  • Order 4 and get 10% off

Universal PSU V3

More Views

Details

The all new Universal PSU. Bigger and badder than ever.

 

Illustrated Build Guide

A well-illustrated thread with an example of how to use the PSU circuit board can be found -HERE

 

  • Fully compatible and optimized for the new Deluxe 4U and Deluxe 5U chassis to allow easy installation on the base, chassis front panel, or on riser panels
  • Can accomodate 35mm, 30mm and 25mm caps
  • Double sided 70um copper tracks
  • Added PI resistors for a total of 7 per side of the PSU
  • Each side is completely independent of the other providing separate grounding take off points
  • Grounding scheme at user's discretion (i.e. can be utilized for star grounding)
  • Ground vias available for joining on-board/local ground
  • On-board heatsinking for the diodes
  • Larger tracks whenever possible
  • Most inputs and outputs have larger vias to accommodate large wires
  • Input and output vias arranged to also accommodate Snap-On terminals
  • Output has larger vias for direct wire soldering to the board
  • Output has vias arranged to either accept Euroblock connectors or Snap-On terminals
  • Diode Section and Capacitor Section can be joined either by large diameter jumper wires or Fast-On connectors or direct soldering
  • Capacitor section can be stacked one on top of the other. Connections for quick parallel stacking are provided via Snap-On connectors or direct soldering.
  • Diode section can be snapped off from the Capacitor section (0.2mm V-Cut both sides)
  • Capacitor section can be snapped off lengthwise regardless if the Diode section is still attached or snapped off for more build flexibility (0.2mm V-Cut both sides)
  • Snapping is possible thanks to 0.2mm v-cuts on each side of the 1.6mm board.  It takes a lot of force to snap the board - enough so you won't ever snap it accidentally but not so much that you will have a hard time snapping it.
  • 80x80 mounting scheme on the Capacitor section for front panel chassis mounting
  • Extensively supports DA's mounting systems and bases
  • Options for Input snubbers (RC or RC + C) and options for output RC snubbers or bypass
 
If you have any questions please discuss them in the V3 Universal Power Supply Circuit Board thread.



P-P-P-PSU-1V30 Bill of Materials

P-PSU-1V30 Dimensions

Additional Information

Warehouse Location USA
Dimensions 171mm x 156mm
Mounting holes Holes are on a 10mm x 10mm grid
Number of boards included 1
Layers 2

You may also be interested in the following product(s)

Super Regulator V2.2

Super Regulator V2.2

$19.00
8 pieces of LSK170 ULTRA LOW NOISE SINGLE N-CHANNEL JFET

8 pieces of LSK170 ULTRA LOW NOISE SINGLE N-CHANNEL JFET

$15.76