You have no items in your cart.

Currency

Burning Amplifier Series

Burning Amplifier Series

Please visit the Burning Amplifier Helpdesk Thread for any questions you might have and for a definitive list of links to all articles and discussions about the Burning Amps.

Boards designed for mounting active component directly to heatsinks share a common universal mounting specification so you can tap your holes once and then re-use those holes for future projects, very handy if you'd like to experiment with several designs on a single chassis!

Please view the Burning Amplifier Configuration Guide to see how to piece together your desired Burning Amplifier configuration or view the board revision histories or SKU notes.

Download Guide

6 Item(s)

per page

Grid  List 

Set Descending Direction
  1. P-BAC-S4V20 - Burning Amplifier Complementary Bias and Output Set for the BA-2 & BA-3 (Requires a gain stage; Makes 2 channels; Rev 2.0)

    P-BAC-S4V20 - Burning Amplifier Complementary Bias and Output Set for the BA-2 & BA-3 (Requires a gain stage; Makes 2 channels; Rev 2.0)

    $25.00

    Two P-BACO-2V20 output boards and two P-BACB-2V20 bias boards. The bias boards are only available in this set. Populate this set with your components and the P-BAGS-1V20 gain stage, then add your own power supply, chassis and heat sinks to complete the BA-2 amplifier in the 3 output pair per channel configuration recommended by Nelson Pass.  If you want more output devices order another pair of output boards here.

    Please visit the Burning Amplifier Helpdesk Thread for any questions you might have and for a definitive list of links to all articles and discussions about the Burning Amps.

    P-BAC-S4V20 Bill of Materials

    P-BAC-S4V20 Schematics

    P-BAC-S4V20 Dimensions

    Learn More
  2. P-BAS-S4V20 - Burning Amplifier Single-ended Bias and Output Set for the BA-1 & BA-3 (Requires a gain stage; Makes 2 channels; Rev 2.0)

    P-BAS-S4V20 - Burning Amplifier Single-ended Bias and Output Set for the BA-1 & BA-3 (Requires a gain stage; Makes 2 channels; Rev 2.0)

    $28.00

    Two P-BASO-2V20 output boards and two P-BASB-2V20 bias boards. The bias boards are only available in this set. Populate this set with your components and the P-BAGS-1V20 gain stage, then add your own power supply, chassis and heat sinks to complete the BA-2 amplifier in the 3 output pair per channel configuration recommended by Nelson Pass.  If you want more output devices order another pair of output boards here.

    Please visit the Burning Amplifier Helpdesk Thread for any questions you might have and for a definitive list of links to all articles and discussions about the Burning Amps.

    P-BAS-S4V20 Bill of Materials

    P-BAS-S4V20 Schematics

    P-BAS-S4V20 Dimensions

    Learn More
  3. P-BACO-2V20 - Extra pair of Complementary Output boards (Requires gain stage and bias boards; Makes 2 channels; Rev 2.0)

    P-BACO-2V20 - Extra pair of Complementary Output boards (Requires gain stage and bias boards; Makes 2 channels; Rev 2.0)

    $20.00

    Sold out!

    Burning Amplifier Complementary Output Board pair, one for each of 2 channels, with no components, These are designed for the Burning Amp BA-2 which is a complementary design. Usually people order these if they want the 6 output devices per channel with the Burning Amplifier Complementary PCB Set (P-BAC-S4V20). They are also useful to simplify building output stages of other complementary designs.

    Please visit the Burning Amplifier Helpdesk Thread for any questions you might have and for a definitive list of links to all articles and discussions about the Burning Amps.

    P-BACO-2V20 Bill of Materials

    P-BACO-2V20 Schematics

    P-BACO-2V20 Dimensions

     

    Learn More
  4. P-BAGS-1V20 - Burning Amplifier Gain Stage for BA-1 & BA-2 (Requires bias boards and output stage; Makes 2 channels; Rev 2.0)

    P-BAGS-1V20 - Burning Amplifier Gain Stage for BA-1 & BA-2 (Requires bias boards and output stage; Makes 2 channels; Rev 2.0)

    $7.00

    Burning Amplifier Gain Stage Board which handles voltage gain for two channels when you populate it with your components. This board is required for both the single-ended BA-1 amp and the complementary BA-2 amp. 

    BAGS is the Burning Amplifier Gain Stage board. Being the Front-End, this is where all the signal voltage gain of a Burning Amp comes from. It's main purpose is to provide adequate gain to drive the suceeding output stage of a Burning Amp assembly.

    Please visit the Burning Amplifier Helpdesk Thread for any questions you might have and for a definitive list of links to all articles and discussions about the Burning Amps.

    P-BAGS-1V20 Bill of Materials

    P-BAGS-1V20 Schematics

    P-BAGS-1V20 Dimensions

    Learn More
  5. P-BASO-2V20 - Extra pair of Single-Ended Output boards (Requires gain stage and bias boards; Makes 2 channels; Rev 2.0)

    P-BASO-2V20 - Extra pair of Single-Ended Output boards (Requires gain stage and bias boards; Makes 2 channels; Rev 2.0)

    $20.00

    Sold out!

    Burning Amplifier Single-Ended Output Board pair with no components, one for each of 2 channels.These are designed for the Burning Amp BA-1 which is a single ended design. Usually people order these if they want more than the 6 output devices per channel with the Burning Amplifier Single Ended PCB Set (P-BAS-S4V20). They are also useful to simplify building output stages of other single-ended designs.

    Please visit the Burning Amplifier Helpdesk Thread for any questions you might have and for a definitive list of links to all articles and discussions about the Burning Amps.

    P-BASO-2V20 Bill of Materials

    P-BASO-2V20 Schematics

    P-BASO-2V20 Dimensions

     

    Learn More
  6. P-BAGSN-1V20 - Burning Amplifier Gain Stage for BA-3 (Requires bias boards and output stage; Makes 2 channels; Rev 2.0)

    P-BAGSN-1V20 - Burning Amplifier Gain Stage for BA-3 (Requires bias boards and output stage; Makes 2 channels; Rev 2.0)

    $14.00

    Burning Amplifier Gain Stage Board. (One board works for 2 channels)

    The BA-3 front end is the latest feedback-less "front end" for the Burning Amp series of Class A Mosfet follower output stages.

    Check this link for an interesting build.


    Please visit the
    Burning Amplifier Helpdesk Thread for any questions you might have and for a definitive list of links to all articles and discussions about the Burning Amps.
     

    P-BAGSN-1V20 Bill of Materials

    P-BAGSN-1V20 Schematics

    P-BAGSN-1V20 Dimensions

    Learn More

6 Item(s)

per page

Grid  List 

Set Descending Direction