You have no items in your cart.

Currency

Chassis

We are very proud to offer a range of chassis from one of the oldest and most highly regarded chassis fabrication houses in the world, Hifi2000.

  • Italian made
  • A family owned and run business
  • Tried and tested by thousands of DIYers since 1977
  • Beautiful
  • Functional
  • High quality
  • Fast and affordable shipping direct from the USA

We like to think of these as "The Armani of Chassis".  Combining fine lines and exquistite craftsmanship these Italian masterpieces will be a home that befits the time, energy and money you have invested in your amplifier project.
 
If you have any questions, comments or suggestions please ask them in the Chassis Discussion Thread in the store support forum.  We are especially open to feedback on new configurations or options.
 

16 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Comparison of risers - perspective view front

    Perforated Riser Panels

    $15.41

    Riser panels transform the flat two dimensional space within a chassis into a 3D playground, allowing for a much higher density of components and unlimited configuration possibilities:

    • Install boards vertically
    • Secure risers to both the front panel and base for extra strength
    • Create entire platforms (for example over the top of a transformer) using standoffs or long bolts
    • Attach risers to the front panel to allow unlimited front panel board mounting possibilities, as well as through panel components such as dials and pots
    • All on a simple 10mmx10mm grid of holes that allows for anything to be spun around any dimension

    Learn More
  2. 2U Slimline (Tube project configuration)

    2U Slimline (Tube project configuration)

    $119.00

    Sold out!

    This model has a solid aluminum cover which is intended for use with tube projects, or any project where you would like to totally customize the top cover.

    Description:

    • 1 x aluminum faceplate 10mm thick, 450mm wide with rounded corners and anodized in silver
    • 2 x aluminum DIY Friendly "Quasi Heatsink" sides anodized in black
    • 1 x aluminum solid top cover, 3mm thick brushed and anodized in black (Intended to be used as a top cover for tube projects)
    • 1 x steel 4 row vented bootom cover, 3mm thick, brushed and anodized in black (Intended to be used as a bottom cover)
    • 1 x aluminum back panel, brushed and anodized in black

    Dimensions:

    • Width: 435mm (Front Panel 450mm) with 415mm usable internal space
    • Depth: 280mm
    • Height: 80mm
    • Weight: 4.5 kg


    Suitable for:

    • Tube projects or any appropriately sized project where the top cover needs to be customized
    Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 3mm Aluminum (Standard Vents)
    Bottom Cover 3mm Aluminum (Standard Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions Internal Depth: 280 mm
    Exterior Dimensions Width: Structure 435 mm rack 415 mm, Height: 80 mm
  3. Showing back panel kit installed (not included)

    Deluxe 4U "Jack of all Chassis" (All Aluminum) V2

    $329.00

    The perfect DIY amplifier playground!  Loaded with features designed specifically to make the life of a DIY amplifier builder easier.  No drilling!  No tapping! Any questions just ask here. Now upgraded and with new features!

    Learn More
    Height 4U
    Heatsinks 40mm Standard Profile
    Top Cover 3mm Aluminum (Maximum Vents)
    Bottom Cover 3mm Aluminum (Maximum Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions Internal width: 360mm, Internal height: 165 mm
    Exterior Dimensions Width: 450mm, Depth: 300mm
    Extras Front panel pre-drilled and tapped, Heatsinks pre-drilled and tapped, Maximally vented covers, Perforated base included, Rear panel pre-drilled and tapped
  4. Front

    Deluxe 5U "Big Amp Chassis" (All Aluminum) V2

    $399.00

    This is the big one!  We call it the "BIG Amp Chassis" for a reason.  It's huge!  And it's loaded with features designed specifically to make the life of a DIY amplifier builder easier.  No drilling!  No tapping!  Any questions just ask here. Now upgraded and with new features!

    Learn More
    Height 5U
    Heatsinks 40mm Wave Profile
    Top Cover 3mm Aluminum (Maximum Vents)
    Bottom Cover 3mm Aluminum (Maximum Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions Internal width: 360mm, Internal height: 210 mm
    Exterior Dimensions Width: 450mm, Depth: 400mm
    Extras Front panel pre-drilled and tapped, Heatsinks pre-drilled and tapped, Maximally vented covers, Perforated base included, Rear panel pre-drilled and tapped
  5. Standard 4U Amplifier Chassis (Mixed steel and aluminum)

    Standard 4U Amplifier Chassis (Mixed steel and aluminum)

    $229.00

    This is a no frills version of the "Jack of all Chassis", suitable for people who can drill and tap their own heatsinks, as well as cut the rear steel panel for connectors.  

    It features steel top/bottom covers and back plate, aluminum heatsinks and 10mm aluminum faceplate.  It has maximally vented top and bottom covers, to allow the maximum possible internal airflow for class A amplification projects.

    Learn More
    Height 4U
    Heatsinks 40mm Standard Profile
    Top Cover 1.5mm Steel (Maximum Vents)
    Bottom Cover 1.5mm Steel (Maximum Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 1.5mm Steel
    Interior Dimensions Internal width: 360mm, Internal height: 165 mm
    Exterior Dimensions Width: 450mm, Depth: 300mm
    Extras Maximally vented covers
  6. Standard 5U Amplifier Chassis (Mixed steel and aluminum)

    Standard 5U Amplifier Chassis (Mixed steel and aluminum)

    $299.00

    This is a no frills version of the "BIG Amp Chassis", suitable for people who can drill and tap their own heatsinks, as well as cut the rear steel panel for connectors.  

    It features steel top/bottom covers and back plate, aluminum heatsinks and 10mm aluminum faceplate.  It has maximally vented top and bottom covers, to allow the maximum possible internal airflow for class A amplification projects.

    Learn More
    Height 5U
    Heatsinks 40mm Wave Profile
    Top Cover 1.5mm Steel (Maximum Vents)
    Bottom Cover 1.5mm Steel (Maximum Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 1.5mm Steel
    Interior Dimensions Internal width: 360mm, Internal height: 210 mm
    Exterior Dimensions Width: 450mm, Depth: 400mm
    Extras Maximally vented covers
  7. 2U Pesante

    2U Pesante

    $79.00

    Sold out!

    This is a simple but beautiful chassis with our standard 10mm aluminum faceplate.

    Description:

    • 1 x aluminum faceplate 10mm thick, 450mm wide with rounded corners and anodized in silver
    • 1 x steel back panel painted with a black anti-scratch finish
    • 2 x steel side panels painted with a black anti-scratch finish
    • 2 x steel standard vented top/bottom covers painted with a black anti-scratch finish

    Dimensions

    • Width: 435mm with 430mm usable internal space
    • Depth: 300mm
    • Height: 80mm
    • Weight: 4.3 kg
    Learn More
    Height 2U
    Heatsinks None
    Top Cover 1.5mm Steel (Standard Vents)
    Bottom Cover 1.5mm Steel (Standard Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 1.5mm Steel
    Interior Dimensions Internal width: 430 mm
    Exterior Dimensions Width: 435mm, Depth: 300mm, Height: 80mm
  8. 2U Pesante (Maximally Vented)

    2U Pesante (Maximally Vented)

    $89.00

    This is a simple but beautiful chassis with maximally vented top and bottom covers and our standard 10mm aluminum faceplate. There are 6 rows of vents, which allows for maximum cooling while retaining structural integrity.

    Description:

    • 1 x aluminum faceplate 10mm thick, 450mm wide with rounded corners and anodized in silver
    • 1 x steel back panel painted with a black anti-scratch finish
    • 2 x steel side panels painted with a black anti-scratch finish
    • 2 x steel maximally vented 6 row top/bottom covers painted with a black anti-scratch finish

    Dimensions

    • Width: 435mm with 430mm usable internal space
    • Depth: 300mm
    • Height: 80mm
    • Weight: 4.3 kg


    Ideal for:

    • Pre-amps and other projects that require excellent internal ventilation
    Learn More
    Height 2U
    Heatsinks None
    Top Cover 1.5mm Steel (Maximum Vents)
    Bottom Cover 1.5mm Steel (Maximum Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 1.5mm Steel
    Interior Dimensions Internal width: 430 mm
    Exterior Dimensions Width: 435mm, Depth: 300mm, Height: 80mm
    Extras Maximally vented covers
  9. 2U Slimline

    2U Slimline

    $129.00

    Sold out!

    Description:

    • 1 x aluminum faceplate 10mm thick, 450mm wide with rounded corners and anodized in silver
    • 2 x aluminum DIY Friendly "Quasi Heatsink" sides anodized in black
    • 2 x aluminum 4 row vented top/bottom covers, 3mm thick, brushed and anodized in black
    • 1 x aluminum back panel, 3mm thick, brushed and anodized in black


    Dimensions:

    • Width: 435mm (Front Panel 450mm) with 415mm usable internal space
    • Depth: 280mm
    • Height: 80mm
    • Weight: 4.5 kg

    Ideal for:

    • Pre-amps and other smaller projects
    • Any smaller project that could benefit from the mounting or cooling options presented by the Quasi Heatsinks
    • Any smaller project where you want the benefit of an aluminum back panel for easy drilling and cutting
    Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 3mm Aluminum (Standard Vents)
    Bottom Cover 3mm Aluminum (Standard Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions Internal Depth: 280 mm
    Exterior Dimensions Width: Structure 435 mm rack 415 mm, Height: 80 mm
  10. Galaxy 183 (3mm Front)

    Galaxy 183 (3mm Front)

    $54.00

    HF1GXA183 Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 1.5mm Steel (Standard Vents)
    Bottom Cover 1.5mm Steel (Standard Vents)
    Front Panel 3mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions 104mm useful interior width
    Exterior Dimensions Width:124mm, Depth: 230mm, Height: 80mm
  11. Galaxy 183 (10mm Front)

    Galaxy 183 (10mm Front)

    $64.00

    HF1NGXA183 Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 1.5mm Steel (Standard Vents)
    Bottom Cover 1.5mm Steel (Standard Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions 104mm useful interior width
    Exterior Dimensions Width:124mm, Depth: 230mm, Height: 80mm
  12. Pictured with ACA chassis (not included) on the sides

    Galaxy 288 (10mm Front)

    $79.00

    HF1NGXA288. A nice match for the ACA chassis. Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 1.5mm Steel (Standard Vents)
    Bottom Cover 1.5mm Steel (Standard Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions Useful interior width: 210mm
    Exterior Dimensions Width: 230mm, Depth: 280mm, Height: 80mm
  13. Galaxy 288 (3mm Front)

    Galaxy 288 (3mm Front)

    $69.00

    HF1GXA288 Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 1.5mm Steel (Standard Vents)
    Bottom Cover 1.5mm Steel (Standard Vents)
    Front Panel 3mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions Useful interior width: 210mm
    Exterior Dimensions Width: 230mm, Depth: 280mm, Height: 80mm
  14. Galaxy 388 (3mm Front)

    Galaxy 388 (3mm Front)

    $79.00

    HF1GXA388 Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 1.5mm Steel (Standard Vents)
    Bottom Cover 1.5mm Steel (Standard Vents)
    Front Panel 3mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions 310mm x 280mm x 80mm
    Exterior Dimensions Width: 330mm, Depth: 280mm, Height: 80mm
  15. Galaxy 388 (10mm Front, Max Vented)

    Galaxy 388 (10mm Front, Max Vented)

    $99.00

    Galaxy 388 with maximum venting. Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 1.5mm Steel (Standard Vents)
    Bottom Cover 1.5mm Steel (Standard Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions 310mm x 280mm x 80mm
    Exterior Dimensions Width: 330mm, Depth: 280mm, Height: 80mm
    Extras Maximally vented covers
  16. Galaxy 388 (10mm Front)

    Galaxy 388 (10mm Front)

    $89.00

    This is a "3/4 width" chassis suitable for smaller projects.  It can comfortably fit a gainclone.

    Description:

    • 1 x aluminum faceplate 10mm thick, 345mm wide with rounded corners and anodized in silver which mounts from the front using socket head bolts
    • 2 x aluminum DIY Friendly "Quasi Heatsink" sides anodized in black
    • 2 x aluminum top/bottom covers, 3mm thick brushed and anodized in black
    • 1 x aluminum back panel, brushed and anodized in black


    Dimensions:

    • Width: 330mm (Faceplate 340mm) with 310mm usable internal space
    • Depth: 280mm
    • Height: 80mm
    • Weight: 2.3 kg


    Ideal for:

    • Gainclones
    • Smaller projects, especially any that could benefit from the mounting or cooling possibilities of the Quasi Heatsinks
    Learn More
    Height 2U
    Heatsinks Quasi
    Top Cover 1.5mm Steel (Standard Vents)
    Bottom Cover 1.5mm Steel (Standard Vents)
    Front Panel 10mm Silver Anodized Aluminum
    Rear Panel 3mm Aluminum
    Interior Dimensions 310mm x 280mm x 80mm
    Exterior Dimensions Width: 330mm, Depth: 280mm, Height: 80mm

16 Item(s)

per page

Grid  List 

Set Descending Direction