diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Wild Burro Audio (http://www.diyaudio.com/forums/wild-burro-audio/)
-   -   Betsy-K FWIW (http://www.diyaudio.com/forums/wild-burro-audio/205838-betsy-k-fwiw.html)

fastbike1 19th February 2012 10:06 PM

Perhaps I haven't been clear. My measured Vas values aren't going down. They are consistent, they just haven't ever measured as large as the specs.

Both drivers are marked WBAL 114 w/ a 1/22/10 date on the back.

FWIW, if the box volume doubles to 4 ft# (111 liters), the F3 drops 4 Hz and the output goes up by 1.5dB but f10 doesn't change.

That's not a good trade from my perpsective, no real change in performance for twice the box volume.

Also frankly, if the box is tuned low (~34Hz) the F3 goes way up and the FR isn't nearly as flat. That also doesn't make any sense as a design choice.
Paul, your site says 2 to 3 ft3 ported, so I don't understand why my result seem to bother you so much. You can see the predicted response curve is quite flat so I wouldn't expect it to be boomy.
My experience with this box modeler is that it is a good predictor of results when measured T/S values are used.


All times are GMT. The time now is 04:47 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2