Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Wild Burro Audio DIY full range speakers from Wild Burro Audio Labs

Thread Tools Search this Thread
Old 19th February 2012, 11:06 PM   #11
fastbike1 is offline fastbike1  United States
diyAudio Member
Join Date: Aug 2009
Location: North Texas, USA
Perhaps I haven't been clear. My measured Vas values aren't going down. They are consistent, they just haven't ever measured as large as the specs.

Both drivers are marked WBAL 114 w/ a 1/22/10 date on the back.

FWIW, if the box volume doubles to 4 ft# (111 liters), the F3 drops 4 Hz and the output goes up by 1.5dB but f10 doesn't change.

That's not a good trade from my perpsective, no real change in performance for twice the box volume.

Also frankly, if the box is tuned low (~34Hz) the F3 goes way up and the FR isn't nearly as flat. That also doesn't make any sense as a design choice.
Paul, your site says 2 to 3 ft3 ported, so I don't understand why my result seem to bother you so much. You can see the predicted response curve is quite flat so I wouldn't expect it to be boomy.
My experience with this box modeler is that it is a good predictor of results when measured T/S values are used.
I was so much older then, I'm younger than that now.
  Reply With Quote


Betsy-K FWIWHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FWIW - THAT Corp low-noise, matched, transistor array's stellavox Analogue Source 1 19th January 2012 11:17 AM
My betsy build fameless Wild Burro Audio 10 28th March 2011 08:38 PM
The Betsy Roushon Wild Burro Audio 5 11th June 2010 11:29 PM
50% off to take Betsy where she's never been! pjanda1 Wild Burro Audio 74 8th June 2010 04:42 AM
Betsy-K Impedence Karl71 Wild Burro Audio 1 7th December 2009 01:09 AM

New To Site? Need Help?

All times are GMT. The time now is 01:03 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio