The news D-Amp DLS3000.... - Page 20

Workhorse · 11th May 2007, 06:03 AM

Quote:

Originally posted by fredos
2U is not competition for me! :-)

From now, only power soft can produce what I'm doing, but unfortunately, here in Montreal area, they really dont have the quote...It seem that they have a lot of thermal issue when used in club for long term at high power...

Fredos

IU is not that hard to design for these guys anyways....

Powersoft has established himself in America and their new President is Mr.John Lee.....He is the former owner of Crest Audio..who started it from scratch.....now a living legend...

The power ratings of their amps are real or just fake? I think you must have tested one of them on your bench surely...

IVX · 21st May 2007, 05:32 PM

Quote:

Originally posted by fredos
2U is not competition for me! :-)

From now, only power soft can produce what I'm doing, but unfortunately, here in Montreal area, they really dont have the quote...It seem that they have a lot of thermal issue when used in club for long term at high power...

Fredos

WOW, you are king of class D power! (remember: little change with the same part count in the feedback network, could improve THD in 2 times)

fredos · 21st May 2007, 07:13 PM

Yeah, I know, but at this power, stability and reliability is more important for me! 1% THD or 0.1% THD at 6Kw do not matter...Your ears are already saturated! And anyway, THD is gived at maximum output, much lower without clipping, that as for now people did'nt reach to many time in a night at this power! They are always scared to burn their speakers!

We just have done Danny Tenaglia at Parking night club last night..He have a reputation to always overdrive sound system...But last night, clipping on sub and low mid have only flickle few time in all night...We have provide 2X 12K HVI for sub, a 8000HVI for low mid, a 8000HVI for hi mid and a 4000HVI for horn. It was over 1500 peoples in the room, and sound was f*&king loud and clear....Every body their was impressed!

http://www.rave.ca/?s=member_gallery_images&u=D-Amp

Fredos

IVX · 21st May 2007, 07:47 PM

Heh, with the same stability.

BTW, where you are in the partys pics?

fredos · 21st May 2007, 08:27 PM

Nowhere (in the back of camera!), was busy to drink beer all night long!

Fredos

fredos · 21st May 2007, 08:36 PM

WorkHorse...Yeah I got a PowerSoft under hand...Q4004, rated at 1000 watts per channel into 4 ohms...I got nearly 600 watts per channel for less than 1 minute, after that, power limiter bring power down to 280 watts, and amplifier shutdown in thermal protection after 15 minutes...Already try it live in stage monitoring, was very hot after 3 hours of show, but did'nt go into thermal cutoff...I will never try these as FOH or main PA amplifier, for sure, show will shutdown! Construction is very good, sound is agressive, generate a LOT of heat, bass is lean....Maybe their hight power series are better....

Fredos

Gyula · 21st May 2007, 09:58 PM

Hi fredos!

I suggest you to find an image and design to break into the world market right now!!!
By the way: THE 62400W was fed from 110V 26A ?

fredos · 22nd May 2007, 12:11 AM

The 12K HVI is powered by 2X 120V 20A, 1 for each channel. That's enought when used for music. These amplifier are not designed for continuous sine wave power, but they are able to do it!

Fredos

Workhorse · 22nd May 2007, 03:38 AM

Hi Fredos,

I have tested there Digam K10 amp its a Half Bridge amp uses mosfets from INFINEON. But it meets its rated specs for just 5 seconds continuous, enough for music i think.

Kanwar

Gyula · 22nd May 2007, 10:25 AM

fredos!

I can be your distributor in Hungary!

21st May 2007, 07:47 PM	#194
IVX diyAudio Member Join Date: Jul 2003 Location: Everywhere (Buddhist's context)	Heh, with the same stability. BTW, where you are in the partys pics? __________________ Best regards, E1.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
There's good news and there's bad news	Magnetmaz	The Lounge	14	2nd January 2012 06:39 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st May 2007, 07:13 PM	#193
fredos diyAudio Member Join Date: Mar 2005 Location: Quebec	Yeah, I know, but at this power, stability and reliability is more important for me! 1% THD or 0.1% THD at 6Kw do not matter...Your ears are already saturated! And anyway, THD is gived at maximum output, much lower without clipping, that as for now people did'nt reach to many time in a night at this power! They are always scared to burn their speakers! We just have done Danny Tenaglia at Parking night club last night..He have a reputation to always overdrive sound system...But last night, clipping on sub and low mid have only flickle few time in all night...We have provide 2X 12K HVI for sub, a 8000HVI for low mid, a 8000HVI for hi mid and a 4000HVI for horn. It was over 1500 peoples in the room, and sound was f*&king loud and clear....Every body their was impressed! http://www.rave.ca/?s=member_gallery_images&u=D-Amp Fredos

21st May 2007, 08:27 PM	#195
fredos diyAudio Member Join Date: Mar 2005 Location: Quebec	Nowhere (in the back of camera!), was busy to drink beer all night long! Fredos

21st May 2007, 08:36 PM	#196
fredos diyAudio Member Join Date: Mar 2005 Location: Quebec	WorkHorse...Yeah I got a PowerSoft under hand...Q4004, rated at 1000 watts per channel into 4 ohms...I got nearly 600 watts per channel for less than 1 minute, after that, power limiter bring power down to 280 watts, and amplifier shutdown in thermal protection after 15 minutes...Already try it live in stage monitoring, was very hot after 3 hours of show, but did'nt go into thermal cutoff...I will never try these as FOH or main PA amplifier, for sure, show will shutdown! Construction is very good, sound is agressive, generate a LOT of heat, bass is lean....Maybe their hight power series are better.... Fredos

21st May 2007, 09:58 PM	#197
Gyula diyAudio Member Join Date: Feb 2004 Location: Kunszentmárton, Hungary	Hi fredos! I suggest you to find an image and design to break into the world market right now!!! By the way: THE 62400W was fed from 110V 26A ?

22nd May 2007, 12:11 AM	#198
fredos diyAudio Member Join Date: Mar 2005 Location: Quebec	The 12K HVI is powered by 2X 120V 20A, 1 for each channel. That's enought when used for music. These amplifier are not designed for continuous sine wave power, but they are able to do it! Fredos

22nd May 2007, 03:38 AM	#199
Workhorse diyAudio Member Join Date: Dec 2004	Hi Fredos, I have tested there Digam K10 amp its a Half Bridge amp uses mosfets from INFINEON. But it meets its rated specs for just 5 seconds continuous, enough for music i think. Kanwar

22nd May 2007, 10:25 AM	#200
Gyula diyAudio Member Join Date: Feb 2004 Location: Kunszentmárton, Hungary	fredos! I can be your distributor in Hungary!