Any one need IRS20124S ??? - diyAudio
Go Back   Home > Forums > Commercial Sector > Vendor Forums > Vendor's Bazaar

Vendor's Bazaar Commercial Vendors large & small hawking their wares

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th March 2006, 06:53 PM   #1
fredos is offline fredos  Canada
diyAudio Member
 
Join Date: Mar 2005
Location: Quebec
Default Any one need IRS20124S ???

Hello guy. Just to let you know I have 54 pieces of IRS20124S mosfet drivers with protection and dead time, not enought power for what I whant. I know that lot of people whant to make experimentation with these chip, so I will not sell more than 6 pieces lot. Every one will be able to test it...

Thanks

Fredos

www.d-amp.com
frederic.bourque@d-amp.com
  Reply With Quote
Old 11th March 2006, 08:41 AM   #2
IVX is offline IVX  Russian Federation
diyAudio Member
 
IVX's Avatar
 
Join Date: Jul 2003
Location: Everywhere (Buddhist's context)
Fredos, thx for your kind offer (actually, IRS20124S already accessible in RU. for $3.90), can i ask you twice, but slightly off topic?..

1) Transient Intermodulation Distorsion =0% due to the nature of the circuit
2) The amplifier output slew rate is internally controlled to optimize phase linearity and improve transient response, there for it cannot have slew rate limit.

..I wondered, what you mean?

PS: i guess, 96% efficiency for amp only?
__________________
Best regards,
E1.
  Reply With Quote
Old 12th March 2006, 01:40 PM   #3
fredos is offline fredos  Canada
diyAudio Member
 
Join Date: Mar 2005
Location: Quebec
Intermodulation is 0% for simple reason of the feedback topologie. All feedback in the amplifier are made in analogue ways, with the speed of switching power transfert. No intermodulation distortion was measured ( under clipping, you understand?).

96% is simple to reach if you design amplifier for Kw and use it in fews 100 watts...Think of what happen if you run a 800 Watts amplifier with 200V 100 Amps APT power mosfet....Switching lose is near he same as STW power mosfet, so the major resistive lose are minimised. Same for power supply! Always use duty cycle limiter too to limit maximum power output...That's all for now!

Just over size every thing and you will see!

Fredos

www.d-amp.com

PS I have think about 15$ for 6 IC....so!
  Reply With Quote
Old 17th November 2006, 06:33 AM   #4
diyAudio Member
 
Join Date: Sep 2005
Send a message via MSN to audiodesign Send a message via Skype™ to audiodesign
Could you send me 6 chips ?

Paypal ?

A. Ciuffoli
www.audiodesignguide.com
  Reply With Quote
Old 17th November 2006, 12:55 PM   #5
Pafi is offline Pafi  Hungary
diyAudio Member
 
Join Date: May 2004
Location: Budapest
fredos!

So actually what is the answer to this question?

Quote:
i guess, 96% efficiency for amp only?
Yes or no?
  Reply With Quote
Old 17th November 2006, 04:15 PM   #6
fredos is offline fredos  Canada
diyAudio Member
 
Join Date: Mar 2005
Location: Quebec
Email me for IC, no prob. Maximum effiency was reached at near 75% modulation deep. If you over size your design and let it run at 75% modulation maximum, you can reach 97.5% effiency. Effiency was measured from power draw to output power. Total effiency of amplifier with switching. And effiency was measured in VA, not in watts due to power factor of a switching. That's the real power. That's the only trick to reach as hight effiency, but at cost of higger voltage and current mosfet and precise duty cycle limiter...You should pay for effiency!

Fredos

www.d-amp.com
  Reply With Quote
Old 17th November 2006, 07:14 PM   #7
sovadk is offline sovadk  Denmark
diyAudio Member
 
sovadk's Avatar
 
Join Date: Sep 2004
Location: Kaspar Sinding Meyer @ DTU in Lyngby
Default Re: Any one need IRS20124S ???

Quote:
Originally posted by fredos
Hello guy. Just to let you know I have 54 pieces of IRS20124S mosfet drivers
Do you have it's big brother IRS20954?

I've heard that IRF are releasing 200V directFET MOSFETS. Do you know anything about this?

They've just released IRF6643 which is 150V rated and with a Ron of 35mohm.
  Reply With Quote
Old 18th November 2006, 12:10 AM   #8
alfsch is offline alfsch  Germany
diyAudio Member
 
Join Date: Jan 2002
Location: augsburg
?
IRF6641
200V max, 51mΩ@ 10V,
Reverse Recovery Time :85 ns, Reverse Transfer Capacitance 46 pf.
  Reply With Quote
Old 18th November 2006, 12:35 AM   #9
sovadk is offline sovadk  Denmark
diyAudio Member
 
sovadk's Avatar
 
Join Date: Sep 2004
Location: Kaspar Sinding Meyer @ DTU in Lyngby
Thanks. I can see that the datasheet is on their site, but you will not find the component if you search for it.
There's a whole list of thir 200V and 150V DirectFET's in this pdf document:
http://lps.et.ntust.edu.tw/ET5905701...n5-26-2004.pdf

Do you know if IRF supplies samples of these FET's?
  Reply With Quote
Old 18th November 2006, 08:43 AM   #10
Pafi is offline Pafi  Hungary
diyAudio Member
 
Join Date: May 2004
Location: Budapest
fredos!

What is "power factor of a switching"? (I know what power factor is, but it is applyed to signals, while switching is not a signal.)

Do your amps have PFC circuit?
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Chip From IR, IRS20124S. Tim__x Class D 20 21st October 2005 03:37 AM


New To Site? Need Help?

All times are GMT. The time now is 05:23 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2