CUSTOM SUBWOOFERS FOR PRO-SOUND IN INDIA - diyAudio
Go Back   Home > Forums > Commercial Sector > Vendor Forums > Vendor's Bazaar

Vendor's Bazaar Commercial Vendors large & small hawking their wares

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 13th July 2013, 07:32 AM   #1
diyAudio Member
 
SIDEWINDER 18X's Avatar
 
Join Date: Jul 2013
Location: CALCUTTA
Default CUSTOM SUBWOOFERS FOR PRO-SOUND IN INDIA

Hi Friends,
I am into re-cone and fabrication of pro-sound & hi-fi sub-woofers
under the brand name of HUNTER AUDIO and recone service ,,, HUNTER AUDIO LOUDSPEAKER RECONERS in Kolkata India.
I have all the resources and set up required for fabrication of hi quality sub-woofers using state of the art technology and parts found on most of the ultimate drivers of top brands around.
Using American & European soft parts, voice-coil, Cast Aluminum frames and motor parts (t-yoke back plates & front washers).
I undertake every possible task of delivering customers what they want.
Starting from any plans building similar drivers as used by brands in their top models like SB1000, T-18 plans, G-SUB plans, Horn Loading plans, Band Pass, Push Pull plans, RCF projects , 18 SOUND projects and many more ....
you can see me at face book look for ..... HUNTER AUDUIO LOUDSPEAKER RECONERS.
Can call me up anytime +91 9331927102.
emil: hunter.audio25@gmail.com
hunter_audio@yahoo.co.in
  Reply With Quote
Old 13th July 2013, 06:22 PM   #2
diyAudio Member
 
SIDEWINDER 18X's Avatar
 
Join Date: Jul 2013
Location: CALCUTTA
Default SUBWOOFER PICS

1KW PRO-SOUND SUB-WOOFER .......
model - SIDEWINDER 18X.
Attached Images
File Type: jpg FRONT VIEW IKW PRO-SOUND SUBWOOFER (2).jpg (583.6 KB, 119 views)
File Type: jpg FRONT VIEW IKW PRO-SOUND SUBWOOFER (1).JPG (620.9 KB, 112 views)
  Reply With Quote
Old 13th July 2013, 06:49 PM   #3
diyAudio Member
 
SIDEWINDER 18X's Avatar
 
Join Date: Jul 2013
Location: CALCUTTA
Default SUBWOOFERS FOR PRO-SOUND IN INDIA

Hi Friends,
I am into re-cone and fabrication of pro-sound & hi-fi sub-woofers
under the brand name of HUNTER AUDIO and re-cone service ,,, HUNTER AUDIO LOUDSPEAKER RECONERS in Calcutta, India.
I have all the resources and set up required for fabrication of hi quality sub-woofers using state of the art technology and parts found on most of the ultimate drivers of top brands around.
Using American & European soft parts, voice-coil, Cast Aluminum frames and motor parts (t-yoke back plates & front washers).
I undertake every possible task of delivering customers what they want.
Customized drivers for any box plans building. Similar drivers as used by big brands in their top models like dual 18 inch 2KW SB1000, T-18 plans, G-SUB plans, Horn Loading plans, Band Pass sub's, Push Pull plans, RCF projects , 18 SOUND projects and for many more DIY plans ....
you can see me on Facebook ..... HUNTER AUDIO LOUDSPEAKER RECONERS.
Can call me up anytime +91 9331927102.
email: hunter.audio25@gmail.com
hunter_audio@yahoo.co.in
Attached Images
File Type: jpg FRONT VIEW IKW PRO-SOUND SUBWOOFER (2).jpg (583.6 KB, 121 views)
File Type: jpg FRONT VIEW IKW PRO-SOUND SUBWOOFER (1).JPG (620.9 KB, 102 views)

Last edited by SIDEWINDER 18X; 13th July 2013 at 07:04 PM.
  Reply With Quote
Old 13th July 2013, 08:44 PM   #4
NEO Dan is offline NEO Dan  United States
diyAudio Member
 
NEO Dan's Avatar
 
Join Date: Jun 2008
Location: N.E. Ohio
Hi Hunter,
Do I see the RROD(Red Ring Of Death) shorting ring, I thought Microsoft had the rights to that...
You should post a pdf export from your measurement system with your driver TSP's, frequency response, and a dimensioned drawing of the driver.
Is India humid? You might want to apply protective treatment to the cone and cap...
__________________
Regards,
Dan
  Reply With Quote
Old 13th July 2013, 09:48 PM   #5
diyAudio Member
 
SIDEWINDER 18X's Avatar
 
Join Date: Jul 2013
Location: CALCUTTA
Default Rep:

Hi Dan,
Thanks for taking time and giving your kind opinion, that's perfectly fine. I had attached that pic just for reference to one of my models, if you follow up my write up, I had just briefed up about my work I do. I had not specified on any particular model on that write up.
Since I had joined up today. And am new to this forum, shall need a little bit of encouragement from you all. As for the cone and dust cap are fiber-glass composite. According to the cone manufacturer the cone body has a good resistance to damp & moisture. I can further apply lacquered treatment from top or to both sides of the cone for extreme condition to ensure overall resistance if required.
Vivek
  Reply With Quote
Old 14th July 2013, 12:18 AM   #6
just another
diyAudio Moderator
 
wintermute's Avatar
 
Join Date: Aug 2003
Location: Sydney
Blog Entries: 22
Please restrict ALL commercial posts to this one thread in vendor's bazaar. Please read the sticky on rules for vendors bazaar. Vendors Bazaar Rules
__________________
Any intelligence I may appear to have is purely artificial!
Some of my photos
  Reply With Quote
Old 15th July 2013, 01:14 PM   #7
diyAudio Member
 
Join Date: Dec 2003
Location: Mumbai
Dear Viki

I think you will have to shift this to the Vendors Bazaar

Suranjan
  Reply With Quote
Old 20th July 2013, 07:26 AM   #8
diyAudio Member
 
SIDEWINDER 18X's Avatar
 
Join Date: Jul 2013
Location: CALCUTTA
Quote:
Originally Posted by NEO Dan View Post
Hi Hunter,
Do I see the RROD(Red Ring Of Death) shorting ring, I thought Microsoft had the rights to that...
You should post a pdf export from your measurement system with your driver TSP's, frequency response, and a dimensioned drawing of the driver.
Is India humid? You might want to apply protective treatment to the cone and cap...
My apology to everybody. I am new to the rules & regulations of this forum. With all respect to everyone, I will follow up the discipline and format of the forum in the future.
  Reply With Quote
Old 20th July 2013, 07:27 AM   #9
diyAudio Member
 
SIDEWINDER 18X's Avatar
 
Join Date: Jul 2013
Location: CALCUTTA
Quote:
Originally Posted by wintermute View Post
Please restrict ALL commercial posts to this one thread in vendor's bazaar. Please read the sticky on rules for vendors bazaar. Vendors Bazaar Rules
My apology to everybody. I am new to the rules & regulations of this forum. With all respect to everyone, I will follow up the discipline and format of the forum in the future.
Click the image to open in full size. Click the image to open in full size.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Who makes the lowest distortion pro-sound subwoofers? thadman Subwoofers 135 7th August 2010 07:12 PM


New To Site? Need Help?

All times are GMT. The time now is 05:32 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2