Go Back   Home > Forums > Commercial Sector > Vendor Forums > Vendor's Bazaar

Vendor's Bazaar Commercial Vendors large & small hawking their wares

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th December 2012, 02:06 PM   #1051
diyAudio Member
 
Join Date: Apr 2011
Quote:
Originally Posted by qusp View Post
no they dont, they have molex type 2.54mm pin connectors, one is designed for high speed data and has some impedance control measures, the other is used for easy availability/accessibility to hobbiests.

ZIF/FFC/FPC uses what is effectively a flexible thin stripline PCB as a cable
Hi qusp,
Thanks for clarify that.
Yes, Amanero have 2.54mm connectores (the type you use to find in older computers).

Since I have those connectors in both boards, and given thatn i2c connections plus a ground return for each signal is not a 1 to 1 setup using a ribbon cable (sorry the terms, i usualy speak spanish) : I still need a PCB (or something like that to route connections.

Objectives, in my understanding is to get the shortest connections and to have independent GND returns for each signal.

That's why I am thinking a small PBC with two Molex 2.54mm connectors will be the best way to do the job.
I am not mounting the amanero on the Chasis, just will stack this PCB adaptor over Buffalo, and again will stack amanero over the adaptor.
Then distance should be minimal.

Would this be the best implementation? given Amanero an Buffalo already have Molex connectors?

Cheers,

Last edited by charly chile; 11th December 2012 at 02:11 PM.
  Reply With Quote
Old 11th December 2012, 03:17 PM   #1052
qusp is offline qusp  Australia
diyAudio Member
 
qusp's Avatar
 
Join Date: Oct 2009
Location: Brisbane, Australia
hard to say, it depends on how well you route the traces on the board and how many times you will plug/unplug. probably your way will be fine, especially if you connect directly to the PCB (not with a cable or a socket, have you soldered the BIII sockets yet?) you could just use male pinheaders, which then solder directly into your adapter, but it would be semi-permanent

it depends, will you be using a lot of DSD and high rate PCM material?
  Reply With Quote
Old 11th December 2012, 06:35 PM   #1053
diyAudio Member
 
Join Date: Apr 2011
Quote:
Originally Posted by qusp View Post
hard to say, it depends on how well you route the traces on the board and how many times you will plug/unplug. probably your way will be fine, especially if you connect directly to the PCB (not with a cable or a socket, have you soldered the BIII sockets yet?) you could just use male pinheaders, which then solder directly into your adapter, but it would be semi-permanent

it depends, will you be using a lot of DSD and high rate PCM material?
Yes, I expect that to be the only imput. I plan to stop using Coax Digital or Optical as I only use Music Servers as a source. This should be enough if I get the desired Sound Quality performance.
  Reply With Quote
Old 11th December 2012, 08:45 PM   #1054
diyAudio Member
 
Join Date: Oct 2011
Pm sent (and added to the list).
  Reply With Quote
Old 12th December 2012, 09:49 AM   #1055
diyAudio Member
 
Join Date: Sep 2012
Received! Thank you.
  Reply With Quote
Old 14th December 2012, 01:35 AM   #1056
leejh is offline leejh  United States
diyAudio Member
 
Join Date: Mar 2005
Location: Seoul, Korea
Received boards.
Thank you!
  Reply With Quote
Old 14th December 2012, 04:58 AM   #1057
diyAudio Member
 
MrMajestic's Avatar
 
Join Date: May 2007
I didnt get a paypal invoice, and people started to recieve boards already? Whats up?
  Reply With Quote
Old 14th December 2012, 09:33 AM   #1058
diyAudio Member
 
Join Date: Oct 2011
Did you send a message titled GB3 with your paypal account name to amanero? When i did that i got an invoice within a day.
  Reply With Quote
Old 14th December 2012, 10:51 AM   #1059
niekos is offline niekos  Netherlands
diyAudio Member
 
Join Date: Oct 2011
Location: Houten, The Netherlands
Nice, received my two boards today. Thanks!
Attached Images
File Type: jpg 20121214_123338.jpg (371.0 KB, 556 views)
  Reply With Quote
Old 14th December 2012, 11:47 AM   #1060
Eric06 is offline Eric06  France
diyAudio Member
 
Join Date: Aug 2011
Received as well.
Thanks a lot.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
HLLY USB SPDIF/ I2S CONVERTER kp93300 Digital Source 12 29th January 2012 02:55 PM
exaU2I - 32bit/384kHz Multi-Channel Asynchronous USB to I2S Interface exa065 exaDevices 0 11th November 2011 11:41 AM
$40 USB to I2S converter sharpi31 Digital Line Level 7 12th July 2009 04:09 PM


New To Site? Need Help?

All times are GMT. The time now is 04:33 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2