DIY Loudspeaker construction

balerit · 11th July 2012, 10:24 AM

Hi Guys

I have released some diy loudspeaker books:

The Book Worm - DIY Audio Books and Manuals - Speakers, Moscode Amplifiers, Electronics, Map Reading, Free Capacitor Intro.

Mac

balerit · 18th July 2012, 08:10 AM

Want to know how to calculate crossover values? or how to wind coils? or measure the resonant frequency of your speaker? Well my books have tons of info regarding the design and construction of loudspeaker boxes.

balerit · 20th July 2012, 08:30 AM

I am debating whether to write a book on crossover theory and manufacture as there doesn't seem to be much proper info on the subject, what do you guys think? It will cover the formulas, crossover slopes, testing coil winding etc.

balerit · 31st July 2012, 10:45 PM

I have started the book on crossovers and have nearly finished it, just some editing and a photo or two. It is called : Crossovers A Laymans Guide to Crossover Networks. It covers the basics of how crossovers work, the topologies, slopes, formulas, charts, winding jigs coil data plus loads more, hope to release in the next week.
Mac

Studio Au · 31st July 2012, 11:18 PM

Can we get a sneak peak...

However good the content, the covers could do with a bit of graphic design revamp.

Have you looked into publishing direct to iBooks store, free and you instantly have a huge audience with all the Apple devices around the world.

balerit · 12:06 PM

Quote:

Originally Posted by Studio Au

Can we get a sneak peak...

However good the content, the covers could do with a bit of graphic design revamp.

Have you looked into publishing direct to iBooks store, free and you instantly have a huge audience with all the Apple devices around the world.

Thanks for the comments, I'll look into it. I am doing this mainly to pass on valuable info and experience so that future generations can gain from it. We had an amplifier guru here who died a while back and all his knowledge is lost. I guess that applies to most trades these days. I'll try and make a better cover, but what do they say never ..... ah well I guess you do judge a book by it's cover.

http://novelbooks.weebly.com/crossovers.html

Cheers Mac

mikje · 1st August 2012, 01:21 PM

How much is shipping to the US (58503) for the two book deal?
Thanks,
Mike

balerit · 1st August 2012, 01:32 PM

Quote:

Originally Posted by mikje

How much is shipping to the US (58503) for the two book deal?
Thanks,
Mike

Hi,

They are ebooks so there is no shipping charges.

Regards
Mac

planet10 · 1st August 2012, 05:06 PM

Is the eBook a pdf or would i need some eBook reader ap?

dave

balerit · 1st August 2012, 06:25 PM

Hi Dave

The download is a self extracting zip file with the ebook, the spreadsheet and an appendix of forms. The book itself is a standalone exe file that opens on its own.

Regards
Mac

11th July 2012, 10:24 AM	#1
balerit diyAudio Member Join Date: Apr 2011 Location: South Africa	DIY Loudspeaker construction Hi Guys I have released some diy loudspeaker books: The Book Worm - DIY Audio Books and Manuals - Speakers, Moscode Amplifiers, Electronics, Map Reading, Free Capacitor Intro. Mac

20th July 2012, 08:30 AM	#3
balerit diyAudio Member Join Date: Apr 2011 Location: South Africa	Crossover theory I am debating whether to write a book on crossover theory and manufacture as there doesn't seem to be much proper info on the subject, what do you guys think? It will cover the formulas, crossover slopes, testing coil winding etc.

1st August 2012, 01:21 PM	#7
mikje Soakin' up the Sound! diyAudio Member Join Date: Feb 2008 Location: Bismarck, ND	How much is shipping to the US (58503) for the two book deal? Thanks, Mike __________________ Marantz PM8003 amp, Squeezebox Touch, DIY Krystals Jolida SJ502B, Mark Audio Alpair 10.2s

1st August 2012, 05:06 PM	#9
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 5	Is the eBook a pdf or would i need some eBook reader ap? dave __________________ community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th July 2012, 08:10 AM	#2
balerit diyAudio Member Join Date: Apr 2011 Location: South Africa	Want to know how to calculate crossover values? or how to wind coils? or measure the resonant frequency of your speaker? Well my books have tons of info regarding the design and construction of loudspeaker boxes.

31st July 2012, 10:45 PM	#4
balerit diyAudio Member Join Date: Apr 2011 Location: South Africa	I have started the book on crossovers and have nearly finished it, just some editing and a photo or two. It is called : Crossovers A Laymans Guide to Crossover Networks. It covers the basics of how crossovers work, the topologies, slopes, formulas, charts, winding jigs coil data plus loads more, hope to release in the next week. Mac

31st July 2012, 11:18 PM	#5
Studio Au diyAudio Member Join Date: Sep 2008 Location: Bristol	Can we get a sneak peak... However good the content, the covers could do with a bit of graphic design revamp. Have you looked into publishing direct to iBooks store, free and you instantly have a huge audience with all the Apple devices around the world.

1st August 2012, 06:25 PM	#10
balerit diyAudio Member Join Date: Apr 2011 Location: South Africa	Hi Dave The download is a self extracting zip file with the ebook, the spreadsheet and an appendix of forms. The book itself is a standalone exe file that opens on its own. Regards Mac

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
thin-walled vs heavy construction for sealed loudspeaker	loheswaran	Multi-Way	30	14th May 2011 05:15 PM
Fibreglass loudspeaker construction	ShinOBIWAN	Multi-Way	33	2nd February 2008 03:22 PM
DIY Loudspeaker construction	sonu	Multi-Way	3	10th May 2005 03:03 PM
Cureved loudspeaker construction page started	Andy G	Multi-Way	33	31st January 2004 11:57 PM
Loudspeaker construction vs sound quality	josefr	Multi-Way	4	11th April 2003 06:24 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read