"Zorin Audio" High quality Turntables and Tonearms

diycoax · 25th April 2012, 04:28 PM

Zorin PUS-12
Zorin PUS-12 are 12” viscous damped one-point support tonearm

Description:
The original patent Head shell design. Overhang, Offset angle and vertical tracking angle are all adjustable. Both sides of the horizontal azimuth counter weight adjusting device. Single Point damping tank design. Tonearm pivot point and the side of the Counter weight and hammer the same plane to reduce the shaking stable tracking. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use.

Specifications:
Type: Static-balance tonearm
Effective length: 308mm
Overhang: 13mm
Offset angle: 17.6 degrees
Mounting distance: 295mm
Cartridge range: 5-20g

Zorin PUS-9
Zorin PUS-9 are 9” viscous damped one-point support tonearm

Description:
The original patent Head shell design. Overhang, Offset angle and vertical tracking angle are all adjustable. Both sides of the horizontal azimuth counter weight adjusting device. Single Point damping tank design. Tonearm pivot point and the side of the Counter weight and hammer the same plane to reduce the shaking stable tracking. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use.

Specifications:
Type: Static-balance tonearm
Effective length: 230mm
Overhang: 18mm
Offset angle: 24 degrees
Mounting distance: 212mm
Cartridge range: 5-18g

diycoax · 04:42 PM

Zorin PUA-12
Zorin PUA-12 are 12” gimbal-bearing tonearm

Description:
The original patent Head shell design. Overhang, Offset angle and vertical tracking angle are all adjustable. Side of the balance centroid adjustment device. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use.

Specifications:
Type: Static-balance tonearm
Effective length: 308mm
Overhang: 13mm
Offset angle: 17.6 degrees
Mounting distance: 295mm
Cartridge range: 5-20g

Zorin PUA-9
Zorin PUA-9 are 9” gimbal-bearing tonearm

Description:
The original patent Head shell design. Overhang, Offset angle and vertical tracking angle are all adjustable. Side of the balance centroid adjustment device. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use.

Specifications:
Type: Static-balance tonearm
Effective length: 230mm
Overhang: 18mm
Offset angle: 24 degrees
Mounting distance: 212mm
Cartridge range: 5-18g

diycoax · 04:47 PM

Zorin PSS-9
Zorin PSS-9 are 9” one-point support tonearm

Description:
Offset angle of head shell design. Convenient cartridge installation and adjustment. Vertical tracking angle are adjustable. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use.

Specifications:
Type: Static-balance tonearm
Effective length: 230mm
Overhang: 18mm
Offset angle: 24 degrees
Mounting distance: 212mm
Cartridge range: 5-16g

c2cthomas · 25th April 2012, 04:42 PM

Wonderful looking tonearm audio eye candy!!!!

Where can we find out about purchase price etc. Do you have a website we can visit? Will you be listing yourself in the Vendors or Manufacturers forums?

SY · 25th April 2012, 04:43 PM

I've moved this over to Vendors'.

diycoax · 25th April 2012, 04:59 PM

Quote:

Originally Posted by c2cthomas

Wonderful looking tonearm audio eye candy!!!!

Where can we find out about purchase price etc. Do you have a website we can visit? Will you be listing yourself in the Vendors or Manufacturers forums?

Thank you for your post.

These products direct sales from Taiwan now. I'm looking for dealers in USA or Europe.
If you interest for any product or question. you can contact me.

Best regards,

diycoax · 26th April 2012, 04:17 PM

Zorin music reference Linear tracking air bearing tonearm

Zorin music reference air pump

Specifications:
Effective length: 53mm
Fixing distance: 230mm
Height adjustment: yes
VTA fine adjustment:26mm
Azimuth fine adjustment: yes
Air bearing: 24 x 60mm
Cartridge range: 5-16g

diycoax · 27th April 2012, 04:09 AM

Zorin music reference Linear tracking air bearing tonearm

Description:
Zorin music reference Linear tracking air bearing tonearm with the short tonearm design. It has excellent tracking. Installation and adjustment are very easy. The bearing sleeve material uses the processing of high-strength aluminum alloy one piece design. The shaft material uses the processing of stainless steel with extremely high precision, while still maintaining a rigid and appearance. Air intake and exhaust vents located in the shaft. Bearing sleeve and shaft practically zero friction in movements. The lateral movement of the quality of the current market minimum. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector.

Zorin music reference air pump

Description:
Zorin music reference air pump with high flow and low noise design. Use of special isolated noise and prevent vibration method installed to the chassis. The pump does not produce oil and water, Without maintenance. Direct access to three cylinders to stabilize the pressure and reduce the airflow pulse.

Specifications:
Effective length: 53mm
Fixing distance: 230mm
Height adjustment: yes
VTA fine adjustment:26mm
Azimuth fine adjustment: yes
Air bearing: 24 x 60mm
Cartridge range: 5-16g

diycoax · 07:49 AM

TP-S5 TURNTABLE

TP-S3 TURNTABLE

TP-S1 TURNTABLE

Carbon mat

diycoax · 3rd May 2012, 07:47 AM

We are a professional turntables and tonearm manufacture company. Specializes in manufacture the High End turntables and tonearm.
We launched its own brand "Zorin Audio". Now there are many users in Taiwan, Hong Kong and Australia.

Zorin Audio is actively seeking dealers and distributors for the U.K., Europe, and Asia, the U.S. and Canada.
If you feel that our approach is a good match for your business, Please contact us to discuss becoming a dealer for Zorin Audio products.

25th April 2012, 04:28 PM	#1
diycoax diyAudio Member Join Date: Jun 2005 Location: Taipei	"Zorin Audio" High quality Turntables and Tonearms Zorin PUS-12 Zorin PUS-12 are 12” viscous damped one-point support tonearm Description: The original patent Head shell design. Overhang, Offset angle and vertical tracking angle are all adjustable. Both sides of the horizontal azimuth counter weight adjusting device. Single Point damping tank design. Tonearm pivot point and the side of the Counter weight and hammer the same plane to reduce the shaking stable tracking. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use. Specifications: Type: Static-balance tonearm Effective length: 308mm Overhang: 13mm Offset angle: 17.6 degrees Mounting distance: 295mm Cartridge range: 5-20g Zorin PUS-9 Zorin PUS-9 are 9” viscous damped one-point support tonearm Description: The original patent Head shell design. Overhang, Offset angle and vertical tracking angle are all adjustable. Both sides of the horizontal azimuth counter weight adjusting device. Single Point damping tank design. Tonearm pivot point and the side of the Counter weight and hammer the same plane to reduce the shaking stable tracking. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use. Specifications: Type: Static-balance tonearm Effective length: 230mm Overhang: 18mm Offset angle: 24 degrees Mounting distance: 212mm Cartridge range: 5-18g

25th April 2012, 04:32 PM	#2
diycoax diyAudio Member Join Date: Jun 2005 Location: Taipei	Zorin PUA-12 Zorin PUA-12 are 12” gimbal-bearing tonearm Description: The original patent Head shell design. Overhang, Offset angle and vertical tracking angle are all adjustable. Side of the balance centroid adjustment device. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use. Specifications: Type: Static-balance tonearm Effective length: 308mm Overhang: 13mm Offset angle: 17.6 degrees Mounting distance: 295mm Cartridge range: 5-20g Zorin PUA-9 Zorin PUA-9 are 9” gimbal-bearing tonearm Description: The original patent Head shell design. Overhang, Offset angle and vertical tracking angle are all adjustable. Side of the balance centroid adjustment device. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use. Specifications: Type: Static-balance tonearm Effective length: 230mm Overhang: 18mm Offset angle: 24 degrees Mounting distance: 212mm Cartridge range: 5-18g Last edited by diycoax; 25th April 2012 at 04:42 PM.

25th April 2012, 04:35 PM	#3
diycoax diyAudio Member Join Date: Jun 2005 Location: Taipei	Zorin PSS-9 Zorin PSS-9 are 9” one-point support tonearm Description: Offset angle of head shell design. Convenient cartridge installation and adjustment. Vertical tracking angle are adjustable. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Separate brass plating titanium hammer. Suitable for installation of various cartridge. The high rigidity stainless steel tonearm pivot and tonearm lift is not easy to wear to ensure long-term use. Specifications: Type: Static-balance tonearm Effective length: 230mm Overhang: 18mm Offset angle: 24 degrees Mounting distance: 212mm Cartridge range: 5-16g Last edited by diycoax; 25th April 2012 at 04:47 PM.

25th April 2012, 04:42 PM	#4
c2cthomas 49 - for the 17th time diyAudio Member Join Date: Oct 2006 Location: Near "Music City" (Nashville Tennessee)	Wonderful looking tonearm audio eye candy!!!! Where can we find out about purchase price etc. Do you have a website we can visit? Will you be listing yourself in the Vendors or Manufacturers forums? __________________ DIY audio can be expensive – but getting to see things go up in smoke - that's priceless!!!! ..... "whatever - call it brainfart of Mighty ZM"

25th April 2012, 04:43 PM	#5
SY diyAudio Moderator Join Date: Oct 2002 Location: Chicagoland Blog Entries: 1	I've moved this over to Vendors'. __________________ If there's a sucker born every minute, where do the rest of them come from?


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th April 2012, 04:17 PM	#7
diycoax diyAudio Member Join Date: Jun 2005 Location: Taipei	Zorin music reference Linear tracking air bearing tonearm Zorin music reference air pump Specifications: Effective length: 53mm Fixing distance: 230mm Height adjustment: yes VTA fine adjustment:26mm Azimuth fine adjustment: yes Air bearing: 24 x 60mm Cartridge range: 5-16g

27th April 2012, 04:09 AM	#8
diycoax diyAudio Member Join Date: Jun 2005 Location: Taipei	Zorin music reference Linear tracking air bearing tonearm Description: Zorin music reference Linear tracking air bearing tonearm with the short tonearm design. It has excellent tracking. Installation and adjustment are very easy. The bearing sleeve material uses the processing of high-strength aluminum alloy one piece design. The shaft material uses the processing of stainless steel with extremely high precision, while still maintaining a rigid and appearance. Air intake and exhaust vents located in the shaft. Bearing sleeve and shaft practically zero friction in movements. The lateral movement of the quality of the current market minimum. Use the ORTOFON arm cable and CARDAS 5-PIN DIN tonearm signal line connector. Zorin music reference air pump Description: Zorin music reference air pump with high flow and low noise design. Use of special isolated noise and prevent vibration method installed to the chassis. The pump does not produce oil and water, Without maintenance. Direct access to three cylinders to stabilize the pressure and reduce the airflow pulse. Specifications: Effective length: 53mm Fixing distance: 230mm Height adjustment: yes VTA fine adjustment:26mm Azimuth fine adjustment: yes Air bearing: 24 x 60mm Cartridge range: 5-16g

3rd May 2012, 07:44 AM	#9
diycoax diyAudio Member Join Date: Jun 2005 Location: Taipei	Zorin Audio High End Turntables and Tonearms TP-S5 TURNTABLE TP-S3 TURNTABLE TP-S1 TURNTABLE Carbon mat Last edited by diycoax; 3rd May 2012 at 07:49 AM.

3rd May 2012, 07:47 AM	#10
diycoax diyAudio Member Join Date: Jun 2005 Location: Taipei	We are a professional turntables and tonearm manufacture company. Specializes in manufacture the High End turntables and tonearm. We launched its own brand "Zorin Audio". Now there are many users in Taiwan, Hong Kong and Australia. Zorin Audio is actively seeking dealers and distributors for the U.K., Europe, and Asia, the U.S. and Canada. If you feel that our approach is a good match for your business, Please contact us to discuss becoming a dealer for Zorin Audio products.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High quality "soft" compressor/limiter	jmar	Solid State	9	30th November 2012 12:05 AM
The "What slogan would you have if you were a high-end audio company?" Thread.	Spasticteapot	Everything Else	118	27th September 2011 03:31 AM
Building a high quality gainclone toroid coupling transformer with "tubeness" winding	ionomolo	Chip Amps	16	13th February 2008 01:20 PM
"high quality" car amp???	SkinnyBoy	Car Audio	46	27th May 2005 06:50 AM
Any "audio quality" SMS resistors out there?	Sigurd Ruschkow	Parts	4	12th November 2004 02:25 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read