diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Vendor's Bazaar (http://www.diyaudio.com/forums/vendors-bazaar/)
-   -   ODAC offerings from Various Vendors (http://www.diyaudio.com/forums/vendors-bazaar/211184-odac-offerings-various-vendors.html)

swalter 30th March 2012 08:42 PM

ODAC offerings from Various Vendors
 


Pre-orders for the ODAC will be taken by mail or PM for now until a forum friendly solution has been put in place.
All orders placed in my original ODAC thread have been recorded. The below offers for the O2 are still valid.

Stefan

Dear fellow DIY'ers,

after seeing another group buy going sour I thought about it for a long time - what could be done better and what will improve things for you, the buyers...
Issues faced are usually long waiting times and missing out on the GB at all. So I came up with the following:

Open a small web shop, get all parts needed in advance, re-stock before sold out. If this is done right there should be no longer waiting period then the post office needs to actually deliver your items.

So I took the risk to spend quite a bit (actually a lot) of money in advance and stocked up a small shop. Holiday season (well deserved 4 weeks off) will delay the opening by a few weeks, but better opening a bit later then opening and then closing again after a weeks time and people waiting for their orders...

So opening time of the web shop will be 2nd of May 2012


Items on offer so far will be:

Objective2 Headphone Amplifier

Parts stocked already (I set the quantities down to zero not to get a premature order):treasure::
  • PCB
  • Part Kit (including SIP sockets and gain resistor set)
  • Desktop version parts (RCA sockets and 6.3mm Headphone socket)
  • Rechargable Batteries
  • Aluminium knobs for volume control in silver and black
  • 220V/15V AC 500mA power supplies with EURO plug

soon to come (ordered already, delivery expected first week of May):
  • aluminum enclosures for the O2 anodized black and silver
  • matching front and back panels
  • front panels with all break outs and silk screen (compatible with the B2 case if you drill out the mounting holes) silver and black

I will also offer fully assembled and tested O2's from May onwards for below 150 USD.
Other things in the pipeline are the ODAC (pre-ordered already) and the ODA once the gerber files and BOM are made available by RS. There will be a custom aluminum case for the ODA and ODA/ODAC available as well, but this might take a bit as I need the measurements first in order for the extrusion tools being made. Color wise they will be black and silver as well with a brushed and anodized surface finish. If there is an interest for back panels with an USB break out for the O2/ODAC combination I could get this made as well.

I will also gladly host other projects for the DIY community, just approach me by PM and we can sort something out.

As an opening bonus I will offer 5% discount on every order I receive during the first month, all you need to do is insert the voucher code "diyaudio" at checkout.
Payment can be done by Paypal (international) or bank transfer (European union). Credit Card payments are accepted via Paypal as well. Shipment will be made within 48 hours after payment has been received.

You are welcome to have a peak around on the page and the shop, criticism and suggestions are more then welcome. There are still a few pictures missing, I will see that I get some made this weekend or early next week.

So happy soldering to all of you,

Stefan

Vaskebjornen 10th April 2012 06:33 AM

Hello i could be interested in some o2 PCB's can you help me with that??

swalter 10th April 2012 07:17 AM

Quote:

Originally Posted by Vaskebjornen (Post 2979555)
Hello i could be interested in some o2 PCB's can you help me with that??


Hi Vaskebjornen,
Sure I can, but you need to wait till I am back to be able to ship them. You can have a look at the link in my footer to see what I have in store, all quantities are set to zero at the moment, but will be re-adjusted once I am back from vacation.

Stefan

overtheairbroadcast 10th April 2012 07:17 AM

Cool. Can't wait.

Vaskebjornen 10th April 2012 07:24 AM

Quote:

Originally Posted by swalter (Post 2979578)
Hi Vaskebjornen,
Sure I can, but you need to wait till I am back to be able to ship them. You can have a look at the link in my footer to see what I have in store, all quantities are set to zero at the moment, but will be re-adjusted once I am back from vacation.

Stefan

Hi Stefan

That is great, keep me updated ;)

/Morten

swalter 10th April 2012 07:43 AM

Dear all,

I just got word from NwAvGuy's partner that the ODAC is gone in production. The estimated time of arival here is end of May.
I will take pre-orders from now on in this thread. Orders placed here are for the fully asembled ODAC board only, you will need to look for a case yourself for now. Once I have the board in hand I will get the measurements for back panels that will fit the O2 if desired, I will add a poll to this thread later on today to see if you folks are interrested.

For the pre-orders, please leave:

Your DIYaudio name ; country ; quantity

And copy the list through adding your details to the bottom please. I will contact you all by PM at the begin of May for the details needed.

Most important thing, the price - 124.95 CHF plus shipping. 5 CHF per pop will be donated to the
forum.

So, now I am off, back to the beach...

Stefan

swalter 12th April 2012 05:39 AM

Price review...
 
Quote:

Originally Posted by swalter (Post 2979599)
Dear all,

I just got word from NwAvGuy's partner that the ODAC is gone in production. The estimated time of arival here is end of May.
I will take pre-orders from now on in this thread. Orders placed here are for the fully asembled ODAC board only, you will need to look for a case yourself for now. Once I have the board in hand I will get the measurements for back panels that will fit the O2 if desired, I will add a poll to this thread later on today to see if you folks are interrested.

For the pre-orders, please leave:

Your DIYaudio name ; country ; quantity

And copy the list through adding your details to the bottom please. I will contact you all by PM at the begin of May for the details needed.

Most important thing, the price - 124.95 CHF plus shipping. 5 CHF per pop will be donated to the
forum.

So, now I am off, back to the beach...

Stefan

Noticed that the price was off a bit :2c: ...

Price for the ODAC will be 99.90 CHF inc. Swiss VAT + shipping, for buyers outside of Switzerland it will cost 92.50 CHF + shipping.

Stefan

Turbon 12th April 2012 07:17 PM

Turbon ; Sweden ; 1 ODAC

everlong 15th April 2012 02:35 PM

I'll be interested in a o2-components kit! But what about a Cmoy kit?

swalter 17th April 2012 05:41 AM

Quote:

Originally Posted by everlong (Post 2986201)
I'll be interested in a o2-components kit! But what about a Cmoy kit?

Hi everlong,

no problem with the O2 kits, just order as many as you like once I am back from vacation. ;)

regarding the Cmoy, this is a different story... There are so many flavors of Cmoy out there that it will be hard to anticipate the taste of everyone. What I will do though is stocking the basic parts needed in my store, so people can choose how they'd like it.
At a later stage I will probably add an own interpretation for a Cmoy, but at the moment this is far from being completed.

Stefan


All times are GMT. The time now is 04:45 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2