Hypex Ncore Chassis by cOz

cOz · 05:01 AM

Hello - Welcome to my Ncore chassis thread. I am offering a mono amplifier chassis for the NC400 & SMPS600 with the following specifications:

Black Aluminum Anodized Finish
Length – 10”
Width – 9”
Height – 3.47”
1 XLR input
or
1 RCA input
1 Speaker binding post
1 Push button front switch
1 Light pipe

The chassis will be entering the machining shop this week and work is progressing nicely.

Update: The chassis has arrived and here are some photos
http://www.cozcables.com/apps/photos...toid=149489797

The pricing is $125 per mono block.

Update: Parts List
Here is the parts list

Digi-Key # Use $
CCM1906-ND IEC and Switch $13.14
708-1300-ND Push Button Switch $18.10
492-1306-ND Light Pipe $.65

Parts Express
Neutrik*NC3FD-L-B-1 Left and Right Signal Input XLR $2.69
Neutrik*NF2D-B-0 Left and Right Signal Input RCA $3.59
Neutrik*NL2MP Left and Right Speaker Posts $1.99

ETI Cable Pod Left and Right Speaker Posts

Thanks,
Robert

slowlearner · 3rd February 2012, 09:04 PM

Waiting on some pics.

cOz · 3rd February 2012, 10:01 PM

They will be coming in the next week or two.

Does anyone have any thoughts on the Ncore Logo? Without any feedback, I think will not include a logo on the front.

Thanks for looking,
Robert

slowlearner · 3rd February 2012, 11:31 PM

I am a little concerned about the dimensions. It seems the modules will have to be crammed very close together.

cOz · 11:51 PM

This should give you a pretty good idea of the spacing. It is actually pretty roomy.

Inside Ncore Mono Chassis - My Photo Gallery

PS if anyone knows of good instructions for posting photos inside the threads, please send me a link via PM...

slowlearner · 4th February 2012, 02:21 AM

Sorry cOz, I was thinking this was a dual mono design. My bad.

get-lit · 11th February 2012, 09:12 PM

Pricing? How to order?

tms0425 · 15th February 2012, 02:10 PM

Looks very interesting.

Why are there 2 Speakons plus binding posts, since Speakons have 4 poles in each one. Also, what IEC is planned?

Will you offer the switch, posts, IEC, etc in addition to the case or are they just off the shelf Digikey/Mouser?

Tom

cOz · 15th February 2012, 08:05 PM

The chassis shipped on Monday and should arrive at my house soon. I will have photos and pricing soon. They will be available for purchase from my website. Home - cOz's Cables

The case created for the 2 pole Speakon connector and that is why there are two holes. All parts are standard and readily available. I will release that information along with the photos when they arrive.

Kind Regards,
Robert

worker · 17th February 2012, 01:22 AM

cOz pictures you are refering on the thread linking the diyaudio area -- do not work (I get permission denied)

Can you pls update us on pricing and how to order (and post pics with ncore installed)

thx

1st February 2012, 05:30 PM	#1
cOz diyAudio Member Join Date: Dec 2004 Location: Houston	Hypex Ncore Chassis by cOz Hello - Welcome to my Ncore chassis thread. I am offering a mono amplifier chassis for the NC400 & SMPS600 with the following specifications: Black Aluminum Anodized Finish Length – 10” Width – 9” Height – 3.47” 1 XLR input or 1 RCA input 1 Speaker binding post 1 Push button front switch 1 Light pipe The chassis will be entering the machining shop this week and work is progressing nicely. Update: The chassis has arrived and here are some photos http://www.cozcables.com/apps/photos...toid=149489797 The pricing is $125 per mono block. Update: Parts List Here is the parts list Digi-Key # Use $ CCM1906-ND IEC and Switch $13.14 708-1300-ND Push Button Switch $18.10 492-1306-ND Light Pipe $.65 Parts Express NeutrikNC3FD-L-B-1 Left and Right Signal Input XLR $2.69 NeutrikNF2D-B-0 Left and Right Signal Input RCA $3.59 NeutrikNL2MP Left and Right Speaker Posts $1.99 ETI Cable Pod Left and Right Speaker Posts Thanks, Robert Last edited by cOz; 21st April 2012 at 05:01 AM. Reason: Updated Info*

3rd February 2012, 11:48 PM	#5
cOz diyAudio Member Join Date: Dec 2004 Location: Houston	This should give you a pretty good idea of the spacing. It is actually pretty roomy. Inside Ncore Mono Chassis - My Photo Gallery PS if anyone knows of good instructions for posting photos inside the threads, please send me a link via PM... Last edited by cOz; 3rd February 2012 at 11:51 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hypex ncore	Tom4s	Vendor's Bazaar	4278	Today 10:32 AM
A Ncore question for Bruno Putzeys	jeffca	Class D	0	7th October 2011 07:25 PM
Question for those who have tried hypex smps with hypex modules	avian	Class D	12	3rd March 2009 09:30 AM
Hypex UcD 180AD + signal wires, Power Supply ST, Hypex Transformer TR100A	c10h12n2	Swap Meet	7	7th July 2007 03:55 PM
FS: Hypex UcD 400/180AD, hypex toroid	Archmage	Swap Meet	4	14th November 2006 04:23 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd February 2012, 09:04 PM	#2
slowlearner diyAudio Member Join Date: Jan 2005 Location: Hawaii	Waiting on some pics.

3rd February 2012, 10:01 PM	#3
cOz diyAudio Member Join Date: Dec 2004 Location: Houston	They will be coming in the next week or two. Does anyone have any thoughts on the Ncore Logo? Without any feedback, I think will not include a logo on the front. Thanks for looking, Robert

3rd February 2012, 11:31 PM	#4
slowlearner diyAudio Member Join Date: Jan 2005 Location: Hawaii	I am a little concerned about the dimensions. It seems the modules will have to be crammed very close together.

4th February 2012, 02:21 AM	#6
slowlearner diyAudio Member Join Date: Jan 2005 Location: Hawaii	Sorry cOz, I was thinking this was a dual mono design. My bad.

11th February 2012, 09:12 PM	#7
get-lit diyAudio Member Join Date: Sep 2009	Pricing? How to order?

15th February 2012, 02:10 PM	#8
tms0425 diyAudio Member Join Date: Oct 2006 Location: Ft. Wayne, IN	Looks very interesting. Why are there 2 Speakons plus binding posts, since Speakons have 4 poles in each one. Also, what IEC is planned? Will you offer the switch, posts, IEC, etc in addition to the case or are they just off the shelf Digikey/Mouser? Tom

15th February 2012, 08:05 PM	#9
cOz diyAudio Member Join Date: Dec 2004 Location: Houston	The chassis shipped on Monday and should arrive at my house soon. I will have photos and pricing soon. They will be available for purchase from my website. Home - cOz's Cables The case created for the 2 pole Speakon connector and that is why there are two holes. All parts are standard and readily available. I will release that information along with the photos when they arrive. Kind Regards, Robert

17th February 2012, 01:22 AM	#10
worker diyAudio Member Join Date: Jan 2012	cOz pictures you are refering on the thread linking the diyaudio area -- do not work (I get permission denied) Can you pls update us on pricing and how to order (and post pics with ncore installed) thx

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)