R2R/Shunt volume controller; Quasar amplifier; Silver-Gold interconnect
 

My name is Tiberiu Vicol, I'm electronic engineer and owner of the domain vicol-audio.ro.
I will be pleased to answer to your questions regarding our products.

Few details about what we sell:

DanZup volume-controller is a high quality R-2R/Shunt volume controller designed to satisfy the most exigent audio fanatics. :)
We sell this as PCB board, PCB board + Atmel ready programmed, full Kit and ready mounted.
Please note that the PCB contain a buffer board which is optional (not included in kit or ready made product).
For R-2R/shunt network we use 0,1% tolerance MELF resistors, ensuring high stability and ultra low noise.
Infrared control is available trough any RC5 capable remote.
PCB support either LCD or LED display.
http://vicol-audio.ro/img/volume-con...controller.JPG


Silver-Gold interconnect is an in-house developed cable based on Mundorf 99% Silver 1% Gold wire.
Double shielding, two silk dielectric layers, one teflon dielectric layer and Furutech RCA connectors.
This is a cable which can make a real difference. :)
RCA or XLR versions are available.
http://vicol-audio.ro/img/interconnect/balanced.JPG


QUASAR is a current-dumping amplifier having his roots in QUAD405 design.
The amplifier is result of a long term development - over 10 years.
We have available PCB-boards and ready mounted and tested modules in two versions, with vertical or lateral MOS-FET´s.
http://vicol-audio.ro/img/quasar/Qua...3i_mounted.jpg


Products available for sale on vicol audio : webshop

Regards,
Tibi

By the end of current month (May 2011) we are going to offer DanZup Volume-Controller PCB boards with ATMEGA ready soldered and programmed for LCD display, at 25euro/board (incl. shipping).
All boards are coming with our latest firmware.

For payment please use our webshop select ¨Only PCB board €25.00¨ and mention your diyaudio username in your paypal order.

Regards,
Tibi

Multi channel use?
 

Hi,

Am I correct in understanding that this can be used for multi channel use? If so what parts would be necessary for a 6 or 8 channel volume control please?

Rgds,
Rob.

Hi Rob,

For 8 channel you will need one controller board and 4 stereo relay boards.
Relay boards will be connected on top of each other.
Please contact me at office(at)vicol-audio dot ro for further info.

Regards,
Tibi